Uploaded March 2013 | Updated November 2026, 5 hours ago
The Two's Complement is a method of representing negative/signed binary numbers that is commonplace in digital electronics and is the basis for how signed integers are represented in embedded systems. This tutorial explains the need for the Two's Complement form and describes how you can perform operations such as additions/subtractions and multiplications using this form. It provides some numerical examples with solutions to allow you to test your understanding of the materials that are presented.
This video is part of materials on modules taught by Derek Molloy, School of Electronic
Engineering at Dublin City University, Ireland: http://www.eeng.dcu.ie/~molloyd/
The Two's Complement is a method of representing negative/signed binary numbers that is commonplace in digital electronics and is the basis for how signed integers are represented in embedded systems. This tutorial explains the need for the Two's Complement form and describes how you can perform operations such as additions/subtractions and multiplications using this form. It provides some numerical examples with solutions to allow you to test your understanding of the materials that are presented.
This video is part of materials on modules taught by Derek Molloy, School of Electronic
Engineering at Dublin City University, Ireland: http://www.eeng.dcu.ie/~molloyd/



![Beaglebone: Driving Stepper Motors in Embedded Linux using the EasyDriver Board
This video examines how we can drive stepper motors using C++ within Embedded Linux using the open source hardware EasyDriver board. The video begins by describing stepper motors and the effects of micro-stepping. It then discusses the EasyDriver Board (V4.4) and all of the available inputs and outputs. The board uses the Allegro A3967 which allows for full, half-, quarter and one eight micro-stepping. The video then explains C++ code that uses the GPIOs on the Beagleboard to wrap the EasyDriver with a C++ class that is easy to use by creating an object of the class for each stepper motor that is connected.
The source code in this video is available through githhub:
git clone git://github.com/derekmolloy/beaglebone
Finally I show an example of my code running on the Mercury Motor (SM-42BYG011-25), which is a low cost stepper motor.
If you use this video in your research, please cite:
Molloy, D. [DerekMolloyDCU]. (2013, Feb, 12). Beaglebone: Driving Stepper Motors in Embedded Linux using the EasyDriver Board [Video file]. Retrieved from http://www.youtube.com/watch?v=gqrjtB2cmu8
Please find more information on these videos at: http://www.derekmolloy.ie/ Beaglebone: Driving Stepper Motors in Embedded Linux using the EasyDriver Board](https://i.ytimg.com/vi/gqrjtB2cmu8/mqdefault.jpg)




![Beaglebone: Qt Creator for C++ ARM Embedded Linux Development
This is the second video in a set of three on Qt application development on the Beaglebone or any other embedded Linux device. The first video introduces the LCD module that I used and this video is where I set up a full toolchain for C++ Qt application development under embedded Linux (Qt for embedded devices). This toolchain allows us to cross compile Qt applications for the Beaglebone, deploy the applications directly to the beaglebone with a single click and even use remote debugging using gdbserver to diagnose any problems with our applications. The main use of this platform is for GUI application development when a LCD module, or external display is present.
In the final video I demonstrate an example application that uses an accelerometer and LED to act as output/input devices and I provide the full source code.
Thad Failor (via comments below) provides some information on how to deal with the requirement to execute . /usr/local/angtrom/arm/environment-setup in advance of starting QtCreator. The steps are:
- Open Qt Creator
- Open your project
- Click Projects under [Your Beaglebone Kit]
- Click Build
- Scroll down to the bottom and click details
- Click on Batch
- Edit Paste the contents of the . /usr/local/angstrom/arm/environment-setup removing any of the export commands.
If you use this video in your research, please cite:
Molloy, D. [DerekMolloyDCU]. (2013, March, 6). Beaglebone: Qt Creator for C++ ARM Embedded Linux Development [Video file]. Retrieved from http://www.youtube.com/watch?v=kP7uvOu9hoQ
Please find more information on these videos at: http://www.derekmolloy.ie/ Beaglebone: Qt Creator for C++ ARM Embedded Linux Development](https://i.ytimg.com/vi/kP7uvOu9hoQ/mqdefault.jpg)

