Arduino: RGB LED Tutorial (Pirhana RGB with LCD Display) @DerekMolloyatDCU
Arduino: RGB LED Tutorial (Pirhana RGB with LCD Display)  @DerekMolloyatDCU
Uploaded May 2011 | Updated November 2026, 3 hours ago
This short video demonstrates how to connect a common anode Pirhana RGB LED to an Arduino and to drive each of the red, green and blue channels individually using PWM (Pulse Width Modulation). A 4x20 LCD Module is connected to the Arduino and the red, green and blue channels are displayed on it. It could be use to create a "mood light". This experiment is a part of a module EE223, an introduction to digital electronics, at Dublin City University, Ireland. The notes can be found at: http://www.eeng.dcu.ie/~molloyd/EE223/
Arduino: RGB LED Tutorial (Pirhana RGB with LCD Display)Beaglebone: Getting Started - Windows USB Network Adapter Setup TutorialExperiments 2.1: Logic Gates - NOT gate using a single transistorBeaglebone: Driving Stepper Motors in Embedded Linux using the EasyDriver BoardExperiments 5.2: Arduino - Serial to Parallel Conversion (74HC164 & 74HC595)Experiments 1.1: Introductory Power Supply CircuitBeagleBone: C/C++ Cross-Compilation for Embedded Linux using Eclipse (Luna), CDT, RSE & Remote DebugInstalling Eclipse CDT and MinGW under Windows (2020)Beaglebone: Qt Creator for C++ ARM Embedded Linux DevelopmentBeagleBone: GPIO Linux Loadable Kernel Module (LKM) Development DemonstrationMSc in Electronic and Computer Technology (MCTY, DC877) at Dublin City University: programme webinarDigital Electronics: The Half Adder and Full Adder
Derek Molloy |

Arduino: RGB LED Tutorial (Pirhana RGB with LCD Display)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER