Experiments 5.2: Arduino - Serial to Parallel Conversion (74HC164 & 74HC595) @DerekMolloyatDCU
Experiments 5.2: Arduino - Serial to Parallel Conversion (74HC164 & 74HC595)  @DerekMolloyatDCU
Uploaded April 2011 | Updated November 2026, 3 days ago
This video looks at serial to parallel conversion in digital electronic circuits. In particular it shows how we can drive a sequence of LEDs using a single pin of the Arduino. Also, it discusses the difference between latched and unlatched serial to parallel converters. The particular ICs that are examined are the 74HC164 and the 74HC595 (latched), where the video demonstrates how to drive 8 LEDs using a single pin and 16 LEDs using two pins of serial data. This video is part of an introductory module on digital electronics. The associated content can be found at http://www.eeng.dcu.ie/~molloyd/EE223/
Experiments 5.2: Arduino - Serial to Parallel Conversion (74HC164 & 74HC595)Experiments 1.1: Introductory Power Supply CircuitBeagleBone: C/C++ Cross-Compilation for Embedded Linux using Eclipse (Luna), CDT, RSE & Remote DebugInstalling Eclipse CDT and MinGW under Windows (2020)Beaglebone: Qt Creator for C++ ARM Embedded Linux DevelopmentBeagleBone: GPIO Linux Loadable Kernel Module (LKM) Development DemonstrationMSc in Electronic and Computer Technology (MCTY, DC877) at Dublin City University: programme webinarDigital Electronics: The Half Adder and Full AdderExperiments 3.1: Sequential Logic - S-R Latch and a Gated S-R LatchExperiments 2.6: Logic Gates -  3 Line to 8 Line Decoder ExampleArduino: Arduino LCD Tutorial II - A Reaction TimerAVR Programming - AVR Studio Tutorial Introduction
Derek Molloy |

Experiments 5.2: Arduino - Serial to Parallel Conversion (74HC164 & 74HC595)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER