Uploaded June 2021 | Updated September 2026, 2 weeks ago
Do you have constant print fails that you can't figure out? If you do, this video may help.
Maybe you've tried adjusting the bowden tube length, the extruder gear spring pressure, changing the filament, replacing the nozzle and nothing seems to work, well there are some other not so obvious reasons for failed prints. In this video we explore one of them to find the cause of the problem, and of course we also find a good solution.
If you'd like to become a patron to help this channel grow and get involved with future video ideas, here is the link: patreon.com/Needitmakeit
The reason I made this video is because I experienced the problem myself, and If I've had the problem, many other people probably have as well. While printing Voron Switchwire parts, I ran into a problem with a print which did not finish no matter which parts I changed, or adjustments I made on the printer. After some research and watching the printer along with the clips shown in the video I discovered the problem. For a simple system, it is remarkably difficult to find the source of some of these 3D printer problems.
I hope you find this video helpful, and if you did please let me know if you have other problems like this you need help with.
If you'd like to support the channel, the links below are affiliate links, a small % of any sale goes towards making future videos for this channel and thank you everyone for your interest and support!
AMAZON USA:
My Printer - amzn.to/3P7YT1j
Capricorn XS PTFE - amzn.to/43ReSoK
Raspberry Pi 4 Computer 2gb - amzn.to/3N1bocn
Pi Camera V2 - amzn.to/3MYHIgd
Long Cable - amzn.to/3CuUJch
Power Cable - amzn.to/42zita6
Raspberry Pi 4B ABS Case W/Fan and Heatsinks - amzn.to/3oZzqfX
AMAZON CANADA:
My printer - amzn.to/3sWfKpO
Capricorn XS PTFE - amzn.to/3jnwbYw
Raspberry Pi 4 Computer 2gb - amzn.to/37IN6kD
Pi Camera V2 - amzn.to/2HA6LZe
Long Cable - amzn.to/2HzdQJq
Power Cable - amzn.to/3jzEjD
#ender3
#3dprinting
#Problemsolving
Do you have constant print fails that you can't figure out? If you do, this video may help.
Maybe you've tried adjusting the bowden tube length, the extruder gear spring pressure, changing the filament, replacing the nozzle and nothing seems to work, well there are some other not so obvious reasons for failed prints. In this video we explore one of them to find the cause of the problem, and of course we also find a good solution.
If you'd like to become a patron to help this channel grow and get involved with future video ideas, here is the link: patreon.com/Needitmakeit
The reason I made this video is because I experienced the problem myself, and If I've had the problem, many other people probably have as well. While printing Voron Switchwire parts, I ran into a problem with a print which did not finish no matter which parts I changed, or adjustments I made on the printer. After some research and watching the printer along with the clips shown in the video I discovered the problem. For a simple system, it is remarkably difficult to find the source of some of these 3D printer problems.
I hope you find this video helpful, and if you did please let me know if you have other problems like this you need help with.
If you'd like to support the channel, the links below are affiliate links, a small % of any sale goes towards making future videos for this channel and thank you everyone for your interest and support!
AMAZON USA:
My Printer - amzn.to/3P7YT1j
Capricorn XS PTFE - amzn.to/43ReSoK
Raspberry Pi 4 Computer 2gb - amzn.to/3N1bocn
Pi Camera V2 - amzn.to/3MYHIgd
Long Cable - amzn.to/3CuUJch
Power Cable - amzn.to/42zita6
Raspberry Pi 4B ABS Case W/Fan and Heatsinks - amzn.to/3oZzqfX
AMAZON CANADA:
My printer - amzn.to/3sWfKpO
Capricorn XS PTFE - amzn.to/3jnwbYw
Raspberry Pi 4 Computer 2gb - amzn.to/37IN6kD
Pi Camera V2 - amzn.to/2HA6LZe
Long Cable - amzn.to/2HzdQJq
Power Cable - amzn.to/3jzEjD
#ender3
#3dprinting
#Problemsolving
