Modustrial Maker | Concrete Bench w/ MELTED CRAYON inlay covered in Epoxy || how to make @modustrial | Uploaded 5 years ago | Updated 3 hours ago
This episode shows how to make a bench or table from white concrete, melted crayons, epoxy resin, and plywood. Building this epoxy crayon concrete bench was a crazy project, but a ton of fun. We used all kinds of techniques - woodworking, concrete, CNC digital fabrication, pouring epoxy resin, and more, so grab some popcorn…this one was fun! Hopefully it inspires some of you to get out there and use crayons and concrete to make a bench, table, or even something else!
For the concrete mix, I used glass-fiber reinforced concrete (GFRC) mix so the bench could be poured thin. We made a drip-shaped foam knockout for the concrete form using the X-Carve. This left the drip shape in the concrete. We could then pour a 2:1 epoxy resin layer in the drip inlay, before melting crayons on top of the epoxy. For the last step, we poured another layer of thick set epoxy resin (a deep pour epoxy) on top of the melted crayons. Lastly, we used the Shaper Origin handheld CNC to cut the legs out of plywood.
\\ KREG TOOLS //
o Adaptive Cutting System (ACS) Master System: http://bit.ly/2NV9saa
o ACS Track Saw: http://bit.ly/30xlGY6
o ACS Project Table: http://bit.ly/2XQQvoY
o Precision Miter Gauge: http://bit.ly/2XQQvoY
\\ SHAUN BOYD MADE THIS //
o YouTube: http://bit.ly/2xeCw15
o Instagram: @shaunboydmadethis - http://bit.ly/2IVKYJz
\\ FOLLOW ME//
o Instagram: @modustrialmaker - goo.gl/F4UdEs
o Blog: modustrialmaker.com
\\CNC LINKS//
o Sign up for a FREE EASEL account: http://bit.ly/2X1SDtn
o Inventables X-Carve CNC: http://bit.ly/2J9u1df
o Spektra Compression Bit: amzn.to/2NbYRXR
\\ EPOXY LINKS //
GET 20% OFF Total Boat with the CODE: “MODUSTRIAL” (when purchased through www.jamestowndistributors.com)
o Total Boat Thick Set Epoxy Resin: http://bit.ly/31TDqOK
o Total Boat High Performance 2:1 Epoxy Resin: http://bit.ly/2uMsaEE
o Vacuum Pot: amzn.to/2X3EsnL
o Vacuum Pump: amzn.to/2XfiyTl
o Torch: amzn.to/2XEp2ug
o Epoxy/Plastic Polish: amzn.to/2sljlQm
o Fine grit sandpaper (to 2000 grit): amzn.to/2smxPPW
\\ CONCRETE LINKS //
o GFRC Concrete Mix: goo.gl/keUX8H
o AR Glass Fibers: goo.gl/t4qpTN
o Cake Fondant Tool for perfect edges: http://amzn.to/2w0JCVx
o Helical Mixing Paddle: amzn.to/2GFyxjF
o Concrete mixer: http://amzn.to/2kEnZFi
o Concrete pigments: http://bit.ly/2GxzWrf
o 1-part concrete sealer: http://amzn.to/2xW7Gth
o Black 100% Silicone Caulk: http://amzn.to/2B64iRY
o Paste Finishing Wax: http://amzn.to/2kF565e
o “From Scratch” GFRC Recipes: goo.gl/35RvFM
\\ TOOLS USED//
o Hikoki / Metabo HPT (Insane!!) 36V Impact Driver: http://bit.ly/2Ygul05
o Hikoki / Metabo HPT 12V Impact Driver: Coming Soon!!
o Hikoki / Metabo HPT Random Orbit Sander: amzn.to/2NgGTnl
o SawStop Table Saw: amzn.to/2YBfNrH
o Fine finish miter saw blade: http://bit.ly/2w8RuVZ
o Melamine blade: http://bit.ly/2JwhdjG
o DFM Toolworks Mini-Square: amzn.to/2LpudYw
o Spektra Compression Bit: amzn.to/2NbYRXR
o Heat Gun: amzn.to/2seaErS
o Shaper Origin Handheld CNC: http://bit.ly/30rPhBW
This video is sponsored by Kreg Tools.
This video was also made possible with support from Inventables, Total Boat, and Metabo HPT / Hikoki Power Tools.
#diyconcrete
#concretebench
#epoxyresin
#crayons
#epoxy
#diy
This episode shows how to make a bench or table from white concrete, melted crayons, epoxy resin, and plywood. Building this epoxy crayon concrete bench was a crazy project, but a ton of fun. We used all kinds of techniques - woodworking, concrete, CNC digital fabrication, pouring epoxy resin, and more, so grab some popcorn…this one was fun! Hopefully it inspires some of you to get out there and use crayons and concrete to make a bench, table, or even something else!
For the concrete mix, I used glass-fiber reinforced concrete (GFRC) mix so the bench could be poured thin. We made a drip-shaped foam knockout for the concrete form using the X-Carve. This left the drip shape in the concrete. We could then pour a 2:1 epoxy resin layer in the drip inlay, before melting crayons on top of the epoxy. For the last step, we poured another layer of thick set epoxy resin (a deep pour epoxy) on top of the melted crayons. Lastly, we used the Shaper Origin handheld CNC to cut the legs out of plywood.
\\ KREG TOOLS //
o Adaptive Cutting System (ACS) Master System: http://bit.ly/2NV9saa
o ACS Track Saw: http://bit.ly/30xlGY6
o ACS Project Table: http://bit.ly/2XQQvoY
o Precision Miter Gauge: http://bit.ly/2XQQvoY
\\ SHAUN BOYD MADE THIS //
o YouTube: http://bit.ly/2xeCw15
o Instagram: @shaunboydmadethis - http://bit.ly/2IVKYJz
\\ FOLLOW ME//
o Instagram: @modustrialmaker - goo.gl/F4UdEs
o Blog: modustrialmaker.com
\\CNC LINKS//
o Sign up for a FREE EASEL account: http://bit.ly/2X1SDtn
o Inventables X-Carve CNC: http://bit.ly/2J9u1df
o Spektra Compression Bit: amzn.to/2NbYRXR
\\ EPOXY LINKS //
GET 20% OFF Total Boat with the CODE: “MODUSTRIAL” (when purchased through www.jamestowndistributors.com)
o Total Boat Thick Set Epoxy Resin: http://bit.ly/31TDqOK
o Total Boat High Performance 2:1 Epoxy Resin: http://bit.ly/2uMsaEE
o Vacuum Pot: amzn.to/2X3EsnL
o Vacuum Pump: amzn.to/2XfiyTl
o Torch: amzn.to/2XEp2ug
o Epoxy/Plastic Polish: amzn.to/2sljlQm
o Fine grit sandpaper (to 2000 grit): amzn.to/2smxPPW
\\ CONCRETE LINKS //
o GFRC Concrete Mix: goo.gl/keUX8H
o AR Glass Fibers: goo.gl/t4qpTN
o Cake Fondant Tool for perfect edges: http://amzn.to/2w0JCVx
o Helical Mixing Paddle: amzn.to/2GFyxjF
o Concrete mixer: http://amzn.to/2kEnZFi
o Concrete pigments: http://bit.ly/2GxzWrf
o 1-part concrete sealer: http://amzn.to/2xW7Gth
o Black 100% Silicone Caulk: http://amzn.to/2B64iRY
o Paste Finishing Wax: http://amzn.to/2kF565e
o “From Scratch” GFRC Recipes: goo.gl/35RvFM
\\ TOOLS USED//
o Hikoki / Metabo HPT (Insane!!) 36V Impact Driver: http://bit.ly/2Ygul05
o Hikoki / Metabo HPT 12V Impact Driver: Coming Soon!!
o Hikoki / Metabo HPT Random Orbit Sander: amzn.to/2NgGTnl
o SawStop Table Saw: amzn.to/2YBfNrH
o Fine finish miter saw blade: http://bit.ly/2w8RuVZ
o Melamine blade: http://bit.ly/2JwhdjG
o DFM Toolworks Mini-Square: amzn.to/2LpudYw
o Spektra Compression Bit: amzn.to/2NbYRXR
o Heat Gun: amzn.to/2seaErS
o Shaper Origin Handheld CNC: http://bit.ly/30rPhBW
This video is sponsored by Kreg Tools.
This video was also made possible with support from Inventables, Total Boat, and Metabo HPT / Hikoki Power Tools.
#diyconcrete
#concretebench
#epoxyresin
#crayons
#epoxy
#diy
