frank howarth | CNC Build 2.0: CNC Router Parts 4' x 8' CNC Router @frankmakes | Uploaded 7 years ago | Updated 14 hours ago
I have built the CNC Router Parts 4x8 Pro Kit. I started by building the base with six legs and the table all made out of 80/20 aluminum extrusion. Then I built the gantry which runs on linear rails along the sides of the table. I attached the z-axis to the gantry and attached all of the motors and wired everything up. After a little fiddling with Mach3, it seems to work. I finished up by working on the table which is a ¾ inch thick piece of MDF.

http://www.cncrouterparts.com

Dude, Where's My CNC?
youtu.be/AzvbNVlcYU4

The CNC Build: Part 1: All About That Base
youtu.be/XNvoFTV5tIE

The CNC Build: Part 2
youtu.be/tyxgYFTkR_M

The CNC Build: Part 3
youtu.be/5ThZws-858M

Some of the tools used in this project
Cantilever Clamps: http://amzn.to/1TJmAFx
Milwaukee 18-volt Compact Drill: http://amzn.to/1sj855F

CNC router parts
http://www.cncrouterparts.com/pro4896-4-x-8-cnc-router-kit-p-253.html
http://www.cncrouterparts.com/4-axis-digital-plug-and-play-nema-34-system-p-132.html
http://www.cncrouterparts.com/22-kw-plug-and-play-spindle-vfd-system-p-353.html

To see upcoming projects follow me on social media

Instagram
instagram.com/frank.howarth

Twitter
twitter.com/FrankHowarth

Facebook
facebook.com/FrankMakes

G+
plus.google.com/+frankhowarth