Uploaded June 2017 | Updated November 2026, 14 hours ago
I have been needing to build a dust collection hook up for the CNC machine. In this project I used a modified version of the dust shoe that is on CNC Router Parts web-page. With the help of Nathan at CNC Router Parts, we made a design for a dust shoe with two 4" flexible hose connections. My hope was that with suction from two 4” hoses, I could get away without using the brush attachment. But I have found that the brush helps greatly in catching the dust and helping it up into the dust hoses.
part 2: youtube.com/watch?v=7-HiTWQbprk
Avid CNC: avidcnc.com
dust shoe: cncrouterparts.com/parametric-dust-shoe-p-396.html
Plastic used: HDPE - High-density polyethylene
Some of the tools used in this project
Cantilever Clamps: amzn.to/1TJmAFx
Milwaukee 18-volt Compact Drill: amzn.to/1sj855F
Whiteside Spiral Bit with Up Cut Solid Carbide 1/2-Inch Diameter: amzn.to/1TJmHRj
Yonico Ball Nose 1/4-Inch Router Bit :amzn.to/2mjskNS
Flexible Brush: amzn.to/2qBN8lC
FastCap Glu-Bot Glue Bottle: amzn.to/1TJn0vq
3M Peltor H10A Optime 105 Earmuff: amzn.to/1sj80iw
3M Reusable Respirator: amzn.to/2cGwyPL
3M Particulate Filter P100: amzn.to/2bYwhaK
To see upcoming projects follow me on social media
Instagram
instagram.com/frank.howarth
Twitter
twitter.com/FrankHowarth
Facebook
facebook.com/FrankMakes
G+
plus.google.com/+frankhowarth
I have been needing to build a dust collection hook up for the CNC machine. In this project I used a modified version of the dust shoe that is on CNC Router Parts web-page. With the help of Nathan at CNC Router Parts, we made a design for a dust shoe with two 4" flexible hose connections. My hope was that with suction from two 4” hoses, I could get away without using the brush attachment. But I have found that the brush helps greatly in catching the dust and helping it up into the dust hoses.
part 2: youtube.com/watch?v=7-HiTWQbprk
Avid CNC: avidcnc.com
dust shoe: cncrouterparts.com/parametric-dust-shoe-p-396.html
Plastic used: HDPE - High-density polyethylene
Some of the tools used in this project
Cantilever Clamps: amzn.to/1TJmAFx
Milwaukee 18-volt Compact Drill: amzn.to/1sj855F
Whiteside Spiral Bit with Up Cut Solid Carbide 1/2-Inch Diameter: amzn.to/1TJmHRj
Yonico Ball Nose 1/4-Inch Router Bit :amzn.to/2mjskNS
Flexible Brush: amzn.to/2qBN8lC
FastCap Glu-Bot Glue Bottle: amzn.to/1TJn0vq
3M Peltor H10A Optime 105 Earmuff: amzn.to/1sj80iw
3M Reusable Respirator: amzn.to/2cGwyPL
3M Particulate Filter P100: amzn.to/2bYwhaK
To see upcoming projects follow me on social media
instagram.com/frank.howarth
twitter.com/FrankHowarth
facebook.com/FrankMakes
G+
plus.google.com/+frankhowarth










