Fixing an old 1940’s Drill Press @frankmakes
Fixing an old 1940’s Drill Press  @frankmakes
Uploaded September 2020 | Updated November 2026, 14 hours ago
My Woodworking Design Series: rlnk.cc/frankhowarththeoryofwoodworking

A friend gave me an old bench top drill press. I could not say no to an old tool so I brought it to the shop. It's a Powr-Kraft drill press from around 1940. It has a 1/2 horsepower single phase motor. Upon inspecting the drill press seemed to be in good working order with almost no rust. I noticed some vertical play in the spindle and took the spindle apart. I discovered that a small collar had slipped its location and was allowing the vertical movement in the drill press spindle. I fixed this and put everything back together again and the drill press seems to work perfectly. I made a new wooden table for the drill press that has two T tracks for hold downs. I also made a fence to hold small objects against. I put the new drill press by the CNC machine in the shop. I hope to get a lot of use out of it.

Patreon
patreon.com/user?u=16151185

Instagram
instagram.com/frank.howarth/?hl=en

Twitter
twitter.com/FrankHowarth

Facebook
facebook.com/FrankMakes
Fixing an old 1940’s Drill PressTypographical Trimming SawFrankenvacMaking Mars out of CherryShop Tour Part 2: Dust CollectionpopcornMoon Art ProjectMounting and Framing a Jigsaw PuzzleMaking Jimmy’s Tool BoxMaking a Garden GateCoffee Table MakeoverChainsaw milling
frank howarth |

Fixing an old 1940’s Drill Press

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER