Uploaded September 2018 | Updated November 2026, 14 hours ago
I have made four bamboo basket boxes for the cubby shelves in our breakfast bar. I made these wooden boxes look a little bit like baskets by cutting bamboo plywood in strips and regluing the strips back together again with the end grain of the bamboo showing on face. This technique produces a nice woven pattern. I also mitered the joints of the boxes to have this pattern wrap-around the corners of the boxes. I rounded over all of the edges of the boxes to give them the look and feel of a soft curvy basket.
Kitchen Remodel: Part 15: Breakfast Bar - Part A:
youtu.be/xujgLFeDJfY
Wood Turned Bamboo Death Star:
youtu.be/7AgD5NUzyOE
Some of the tools used in this project
CNC: cncrouterparts.com
bamboorevolution.com
Cantilever Clamps: amzn.to/1TJmAFx
Milwaukee 18-volt Compact Drill: amzn.to/1sj855F
Whiteside Router Bits Compression 1/4-Inch: amzn.to/2pV9ouk
Router Bit 1/4-Inch Down Cut: amzn.to/2piSkw5
Oshlun 8-1/2-Inch Negative Hook Finishing ATB Saw Blade :amzn.to/1TJmTQJ
FastCap Glu-Bot Glue Bottle: amzn.to/1TJn0vq
3M Peltor H10A Optime 105 Earmuff: amzn.to/1sj80iw
3M Reusable Respirator: amzn.to/2cGwyPL
3M Particulate Filter P100: amzn.to/2bYwhaK
Moffatt Task Lamp: amzn.to/2roQNH9
Bessey Strap Clamp: amzn.to/29qLCNR
Wixey WR300 Digital Angle Gauge: amzn.to/1UfwoID
To see upcoming projects follow me on social media
Instagram
instagram.com/frank.howarth
Twitter
twitter.com/FrankHowarth
Facebook
facebook.com/FrankMakes
G+
plus.google.com/+frankhowarth
I have made four bamboo basket boxes for the cubby shelves in our breakfast bar. I made these wooden boxes look a little bit like baskets by cutting bamboo plywood in strips and regluing the strips back together again with the end grain of the bamboo showing on face. This technique produces a nice woven pattern. I also mitered the joints of the boxes to have this pattern wrap-around the corners of the boxes. I rounded over all of the edges of the boxes to give them the look and feel of a soft curvy basket.
Kitchen Remodel: Part 15: Breakfast Bar - Part A:
youtu.be/xujgLFeDJfY
Wood Turned Bamboo Death Star:
youtu.be/7AgD5NUzyOE
Some of the tools used in this project
CNC: cncrouterparts.com
bamboorevolution.com
Cantilever Clamps: amzn.to/1TJmAFx
Milwaukee 18-volt Compact Drill: amzn.to/1sj855F
Whiteside Router Bits Compression 1/4-Inch: amzn.to/2pV9ouk
Router Bit 1/4-Inch Down Cut: amzn.to/2piSkw5
Oshlun 8-1/2-Inch Negative Hook Finishing ATB Saw Blade :amzn.to/1TJmTQJ
FastCap Glu-Bot Glue Bottle: amzn.to/1TJn0vq
3M Peltor H10A Optime 105 Earmuff: amzn.to/1sj80iw
3M Reusable Respirator: amzn.to/2cGwyPL
3M Particulate Filter P100: amzn.to/2bYwhaK
Moffatt Task Lamp: amzn.to/2roQNH9
Bessey Strap Clamp: amzn.to/29qLCNR
Wixey WR300 Digital Angle Gauge: amzn.to/1UfwoID
To see upcoming projects follow me on social media
instagram.com/frank.howarth
twitter.com/FrankHowarth
facebook.com/FrankMakes
G+
plus.google.com/+frankhowarth










