![Chosen Men - Keeping the 95th Rifles Simple! [How I Paint Things] @SonicSledgehammerStudio](https://i.ytimg.com/vi/fP6hW8ARP5g/maxresdefault.jpg)
Uploaded September 2023 | Updated September 2026, 1 week ago
The 95th Rifles - also known as the Greenjackets, or the Grasshoppers - are probably one of the most famed and feted light infantry units throughout the world. Painting their distinctive green uniforms isn't a chore... especially if you're willing to forego absolutely strident accuracy and take up the mantle of "Uniform Isn't!"
The video where I 'go overboard' in painting a face, hopefully queued up to the right moment! youtu.be/TKP_9NXQi_4?si=Do5TqBFaWixEfRqS&t=665
00:00 - Intro
01:09 - Priming & Colour Notes
02:47 - Basecoats
09:54 - Shading
13:13 - Highlighting & Finishing Touches
15:01 - The Finished Rifleman
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Robison, Woodcock, and David Kinney - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
patreon.com/sonicsledgehammer
twitter.com/sonicsledge
instagram.com/sonicsledgehammer
ko-fi.com/docwholigan
http://exit23.games
THE BASE: A thick layer of PVA glue followed by rocky sand - I've used WSS 'Army Coarse.' Paint with Vallejo Brown Sand, shade with Army Painter Soft Tone, then drybrush Vallejo Dark Sand. Tiny dots of PVA glue to add some static grass in little patches.
PAINTS USED:
PRIMER:
Mechanicus Standard Grey (Citadel Spray Can)
VALLEJO:
Luftwaffe Camo Green
Azure
Flat Brown
German Grey
Flat Green
Stone Grey
CITADEL:
Corax White (Base)
Rakarth Flesh (Base)
Mournfang Brown (Base)
Iron Hands Steel (Base)
Retributor Armour (Base)
Lahmian Medium (Technical)
Skavenblight Dinge (Layer)
Cadian Fleshtone (Layer)
Kislev Flesh (Layer)
Carroburg Crimson (Shade)
Apothecary White (Contrast)
ARMY PAINTER:
Tanned Flesh
Leather Brown
Uniform Grey
Strong Tone
VARNISH:
Varnish+ (Instar)
The 95th Rifles - also known as the Greenjackets, or the Grasshoppers - are probably one of the most famed and feted light infantry units throughout the world. Painting their distinctive green uniforms isn't a chore... especially if you're willing to forego absolutely strident accuracy and take up the mantle of "Uniform Isn't!"
The video where I 'go overboard' in painting a face, hopefully queued up to the right moment! youtu.be/TKP_9NXQi_4?si=Do5TqBFaWixEfRqS&t=665
00:00 - Intro
01:09 - Priming & Colour Notes
02:47 - Basecoats
09:54 - Shading
13:13 - Highlighting & Finishing Touches
15:01 - The Finished Rifleman
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Robison, Woodcock, and David Kinney - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
patreon.com/sonicsledgehammer
twitter.com/sonicsledge
instagram.com/sonicsledgehammer
ko-fi.com/docwholigan
http://exit23.games
THE BASE: A thick layer of PVA glue followed by rocky sand - I've used WSS 'Army Coarse.' Paint with Vallejo Brown Sand, shade with Army Painter Soft Tone, then drybrush Vallejo Dark Sand. Tiny dots of PVA glue to add some static grass in little patches.
PAINTS USED:
PRIMER:
Mechanicus Standard Grey (Citadel Spray Can)
VALLEJO:
Luftwaffe Camo Green
Azure
Flat Brown
German Grey
Flat Green
Stone Grey
CITADEL:
Corax White (Base)
Rakarth Flesh (Base)
Mournfang Brown (Base)
Iron Hands Steel (Base)
Retributor Armour (Base)
Lahmian Medium (Technical)
Skavenblight Dinge (Layer)
Cadian Fleshtone (Layer)
Kislev Flesh (Layer)
Carroburg Crimson (Shade)
Apothecary White (Contrast)
ARMY PAINTER:
Tanned Flesh
Leather Brown
Uniform Grey
Strong Tone
VARNISH:
Varnish+ (Instar)
![Chosen Men - Keeping the 95th Rifles Simple! [How I Paint Things]](https://i.ytimg.com/vi/fP6hW8ARP5g/mqdefault.jpg "Chosen Men - Keeping the 95th Rifles Simple! [How I Paint Things]
The 95th Rifles - also known as the Greenjackets, or the Grasshoppers - are probably one of the most famed and feted light infantry units throughout the world. Painting their distinctive green uniforms isnt a chore... especially if youre willing to forego absolutely strident accuracy and take up the mantle of Uniform Isnt!
The video where I go overboard in painting a face, hopefully queued up to the right moment! https://youtu.be/TKP_9NXQi_4?si=Do5TqBFaWixEfRqS&t=665
00:00 - Intro
01:09 - Priming & Colour Notes
02:47 - Basecoats
09:54 - Shading
13:13 - Highlighting & Finishing Touches
15:01 - The Finished Rifleman
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Robison, Woodcock, and David Kinney - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://twitter.com/sonicsledge
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/docwholigan
http://exit23.games
THE BASE: A thick layer of PVA glue followed by rocky sand - Ive used WSS Army Coarse. Paint with Vallejo Brown Sand, shade with Army Painter Soft Tone, then drybrush Vallejo Dark Sand. Tiny dots of PVA glue to add some static grass in little patches.
PAINTS USED:
PRIMER:
Mechanicus Standard Grey (Citadel Spray Can)
VALLEJO:
Luftwaffe Camo Green
Azure
Flat Brown
German Grey
Flat Green
Stone Grey
CITADEL:
Corax White (Base)
Rakarth Flesh (Base)
Mournfang Brown (Base)
Iron Hands Steel (Base)
Retributor Armour (Base)
Lahmian Medium (Technical)
Skavenblight Dinge (Layer)
Cadian Fleshtone (Layer)
Kislev Flesh (Layer)
Carroburg Crimson (Shade)
Apothecary White (Contrast)
ARMY PAINTER:
Tanned Flesh
Leather Brown
Uniform Grey
Strong Tone
VARNISH:
Varnish+ (Instar)")
![Metallic Black Armour - Iron Hands Revisited [How I Paint Things]](https://i.ytimg.com/vi/feh-caT9ZzE/mqdefault.jpg "Metallic Black Armour - Iron Hands Revisited [How I Paint Things]
Iron Hands have a somewhat unfair reputation for being boring. Black armour, a little silver... and youre done. But theres plenty of ways you can put a little life into what is essentially a black and white colour scheme! With a little warmth in your bases, the Marines will look all the more austere and severe as well.
00:00 - Intro
00:48 - Priming Notes
01:28 - Basecoats
08:26 - Shading
10:03 - Highlights & Finishing Touches
14:22 - The Finished Lieutenant
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Robison, Woodcock, David Kinney, and Matt Dischner - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://twitter.com/sonicsledge
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/docwholigan
http://exit23.games
PAINTS USED:
PRIMERS: Matt Black (Army Painter Spray)
VALLEJO:
Black (Model Air Metallic)
Silver Grey
CITADEL:
Mephiston Red (Base)
Pallid Wych Flesh (Layer)
ARMY PAINTER:
Gunmetal (Fanatic)
Plate Mail Metal (Fanatic)
Weapon Bronze (Fanatic)
Arctic Gem (Fanatic)
Ancient Stone (Fanatic)
Basilisk Red (Fanatic)
Oak Brown (Fanatic)
Peachy Flesh (Speedpaint)
Periwinkle Purple (Speedpaint)
Tidal Wave (Speedpaint)
Matt White (Fanatic)
Leather Brown (Fanatic)
Wyvern Fury (Fanatic)
True Brass (Fanatic)
BASE:
A thick layer of Stirland Mud right over all the bits you want to be mucky - go over the stupid Chaos helmet on the base if you dont want it! Drybrush heavily first with Golgfag Brown, then lightly drybrush Tyrant Skull over both the sand and the exposed stonework to tie it in. Add tufts you like, and done!")
![Elegoos Saturn 4 Ultra - The Wargamers Printer [Impressions & Review]](https://i.ytimg.com/vi/fxCyNvexiNo/mqdefault.jpg "Elegoos Saturn 4 Ultra - The Wargamers Printer [Impressions & Review]
Ive had an Elegoo 3D printer in the house since the Mars line was introduced. As a worthy competitor in the entry-level printer line, the Mars Pro and Ultra versions have added a few neat features to make printing easier. The Saturn 4 Ultras no different, with a bunch of useful tools like an auto-stop function when it detects something that shouldnt be in the vat, a resin warmer, and even a camera so you can remotely view how larger prints are doing.
Check out the fancy product page with all the bells and whistles here: https://eu.elegoo.com/pages/elegoo-saturn-4-ultra
Capable of turning out huge numbers of infantry (especially if you start looking at smaller scales) or large vehicles at a time - even scenery - the Saturn 4 Ultra is a beast of a machine, capable of printing almost anything imaginable for a collection of miniatures or wargaming table.
Also worth mentioning - and not related to the printer at all - is the excellent service Ive always received from Elegoo. Especially considering the time zone differences, their responses are always prompt and thorough, and theyve made sure Ive always had what I need with previous machines to keep them in service and fix any little odd problems that have popped up in the past.
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Ben, Robison, David Kinney, Fred, and Matt Dischner - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games")
![Quick Army Painting: Uruk-Hai Scouts [How I Paint Things]](https://i.ytimg.com/vi/gG_PQhO4wGQ/mqdefault.jpg "Quick Army Painting: Uruk-Hai Scouts [How I Paint Things]
The Isengard Battlehost is well-stocked with both warriors and rangers. Though the latter dont typically take to the field in heavy armour - and most arent carrying shields - their high Fight Value and Courage make them a difficult proposition for most of the basic infantry available to Good armies in the Middle Earth Strategy Battle Game. Plus, theyre a way to get some much-needed ranged offense into your army. Painting them takes no time at all, which is even better still!
00:00 - Intro
00:36 - Priming Notes
01:36 - Basecoats
08:56 - Shading
09:56 - Highlighting & Finishing Touches
11:44 - The Finished Uruk-Hai
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, and Chris - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
PAINTS USED:
PRIMERS: Matt Black, Leather Brown (Army Painter Spray)
ARMY PAINTER:
Tree Ancient (Fanatic)
Prairie Ochre (Fanatic)
Ironclad Grey (Fanatic)
Oak Brown (Fanatic)
Bootstrap Brown (Fanatic)
Mocca Skin (Fanatic)
Ancient Stone (Fanatic)
Skeleton Bone (Fanatic)
Death Metal (Fanatic)
Gun Metal (Fanatic)
Strong Tone (Fanatic)
Dryad Brown (Fanatic)
Plate Mail Metal (Fanatic)
VARNISH:
Army Painter Matt Varnish Spray
THE BASE: Layer of PVA followed by sand, painted first with thinned down Brigadine Brown, then heavily drybrushed with Paratrooper Tan with a little touch of Ancient Stone on the larger clumps of texture. Tiny dots of PVA and static grass to add texture.")
![Painting Automated Infantry - Machines on the March! [How I Paint Things]](https://i.ytimg.com/vi/hLUVf2M3qbI/mqdefault.jpg "Painting Automated Infantry - Machines on the March! [How I Paint Things]
When Axis forces are deploying genetically modified horrors that can swoop from the sky or burst from the shadows in a flurry of rending teeth and slashing claws, even the most stout-hearted of Commonwealth infantry can falter in the face of such horrors. What is to be done? Remove the heart from the equation! The seamless fusion of Alan Turings tireless research and Rift-tech results in the Automated Infantry: fearless automatons that stride through the heaviest firepower, staring into the face of unspeakable monstrosities without blinking. They dont even have eyelids.
The HMG-armed Automated Infantry make a great addition to any Assault Platoon in Konflikt 47, since weaponry with a Penetration value in the game can make a huge difference. With monsters and powered armour striding around impervious to small arms fire, even the humble, obsolescent anti-tank rifle has a place on the battlefield. Churning out a wall of heavy-hitting lead, these Browning-toting robots can cut a swathe through enemy defences for your regular infantry to exploit. At least, thats the plan!
Check out the entire Warlord Games range at their website here: https://r.warlordgames.com/aff/?SONICSLEDGEHAMMER Purchases made through this affiliate link net me a small commission at no cost to you!
00:00 - Intro
00:48 - Some Assembly Pointers
02:29 - Priming Notes - What Was Service Brown?
04:32 - Basecoats
08:14 - Shading
09:09 - Highlights & Finishing Touches
10:58 - The Finished AI Section
Thanks to Producer Patrons Alan, Kyrie, Andrew, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, and Chris - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
PAINTS USED
PRIMER: Leather Brown (Army Painter Spray)
CITADEL:
Iron Warriors (Base)
ARMY PAINTER:
Matt White (Fanatic)
True Copper (Fanatic)
Pure Red (Fanatic)
Leather Brown (Fanatic)
Strong Tone (Wash)
Speedpaint Medium
Command Khaki (Fanatic)
Poppy Red (Speedpaint)
VALLEJO:
US Olive Drab
Refractive Green
VARNISH:
Colour Forge Matt Varnish Spray
THE BASE: Layer of PVA followed by sand, painted first with thinned down Vallejo Flat Brown, then heavily drybrushed with Dark Sand. A light sprinkling of PVA and some static grass, then Mountain Tufts from Army Painter to vary the height.")
![Painting United States Tanks - Colour Modulation Without an Airbrush [How I Paint Things]](https://i.ytimg.com/vi/hoFfKOblXgg/mqdefault.jpg "Painting United States Tanks - Colour Modulation Without an Airbrush [How I Paint Things]
United States and Allied armor (or armour, if youre of the British or then-Dominion persuasion!) is something youll almost certainly end up painting at some point if youre wargaming WWII. Thankfully, theres a ton of ways to add a little visual interest to boring green tanks!
Thanks to Warlord Games for sending along the M4 Sherman for this guide! Check out the pre-order page for Achtung Panzer here: https://eu.warlordgames.com/products/achtung-panzer-blood-steel-starter-set
Theres a bunch of other army boxes and sets to either add a bunch of armour to your Bolt Action collection, or get a platoon of tanks ready for Achtung Panzer and wallop an opponent across the table!
Grab the Wargamers Guide to US Infantry as a free PDF from Patreon: https://www.patreon.com/posts/88013871
00:00 - Intro
00:53 - Aerial Conversion
03:37 - Priming Notes
04:37 - Basecoats
05:55 - Shade Mix
07:51 - More Basecoats
13:51 - Applying Transfers
15:58 - Weathering - The Fun Stuff!
23:10 - The Finished Tank
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Robison, Woodcock, David Kinney, and Matt Dischner - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://twitter.com/sonicsledge
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/docwholigan
http://exit23.games
PAINTS USED:
PRIMER:
US Olive Drab (Vallejo Spray Can), or a similar green as discussed in the video.
VALLEJO:
US Olive Drab
Iraqi Sand
German Grey
Azure
Vermillion
Beige Brown
German Camo Black Brown
Cavalry Brown
ARMY PAINTER:
Strong Tone
Speedpaint Medium
Military Shade
CITADEL:
Lahmian Medium")
![The Army Painters Quickshade Dip - Painting a Mech Suit [How I Paint Things]](https://i.ytimg.com/vi/i73IBev48i8/mqdefault.jpg "The Army Painters Quickshade Dip - Painting a Mech Suit [How I Paint Things]
The Quickshade Dip is what launched The Army Painter. One of the first purpose-made speed painting products on the market, it would be followed by spray primers, paints and washes, right up to the Speedpaint and Fanatic line that exists today. So surely its been superseded by all that cool new stuff, right?
...well, not really. Turns out they still make it for a reason: It still works! Giving a slightly different finish to an acrylic wash and being able to undo it with a little white spirit or turpentine on your brush to work it away from areas before its fully cured, the Quickshade Dip still has its uses and gives a great-looking result for very little work.
Just, yknow. Let it cure properly before varnishing it. Seriously. Dont do what I did in the video! I swear.
Find the M2 Gallus Hardsuit STLs here: https://skullforgestudios.gumroad.com/l/jivku
Make sure to check out the Skullforge Studio Patreon as well for a ridiculous number of awesome files each month: https://www.patreon.com/skullforgestudios This isnt a sponsored video, I just really like what they do and enjoy the miniatures!
00:00 - Intro
00:50 - Miniature & Priming Notes
01:39 - Basecoats
06:42 - Using the Dip
10:16 - Weathering & Finishing Touches
13:25 - The Finished Hardsuit
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, and Chris - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
PAINTS USED:
PRIMERS: Necrotic Flesh (Army Painter Spray)
ARMY PAINTER:
Camouflage Green (Fanatic)
Leather Brown (Fanatic)
Gunmetal (Fanatic)
Desert Yellow (Fanatic)
Warped Yellow (Fanatic)
Ultramarine Blue (Fanatic)
Pure Red (Fanatic)
Matt Black (Fanatic)
Necrotic Flesh (Fanatic)
Baron Blue (Fanatic)
Matt White (Fanatic)
Oak Brown (Fanatic)
Grotesque Green (Fanatic)
Plate Mail Metal (Fanatic)
Barren Dune (Fanatic)
THE BASE: Apply a layer of Citadel Stirland Mud, drybrush heavily with Citadel Golgfag Brown, then lightly again with Citadel Tyrant Skull. Add tufts to taste.")
![SALUTE 52 Special Figure: James MacDonell [How I Paint Things]](https://i.ytimg.com/vi/iMZm-46-Q1k/mqdefault.jpg "SALUTE 52 Special Figure: James MacDonell [How I Paint Things]
The bravest man in the British Army! Thats quite a claim by any stretch, but when its the Duke of Wellington that says it about you... well, lets say that James MacDonells Wikipedia page makes for exciting reading!
SALUTE 52 - South Londons annual wargaming show - will be held on the 12th of April this year! Check out more information including times, events, and location information at the link here: https://southlondonwarlords.co.uk/next-salute
00:00 - Intro
01:02 - Priming Notes
01:59 - Basecoats
08:42 - Shading - The Juice is Loose!
10:07 - Highlights
15:50 - The Finished Miniature
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Ben, Robison, David Kinney, Fred, and Matt Dischner - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
PAINTS USED:
PRIMERS: Premium Grey (Vallejo Spray Primer)
ARMY PAINTER:
Matt White (Fanatic)
Hoplite Gold (Speedpaint)
Golden Armour (Speedpaint)
Ruddy Umber (Fanatic)
Ultramarine Blue (Fanatic)
Dryad Brown (Fanatic)
Dragon Red (Fanatic)
Uniform Grey (Fanatic)
Basilisk Red (Fanatic)
Bootstrap Brown (Fanatic)
Plate Mail Metal (Fanatic)
Matt Black (Fanatic)
Ash Grey (Fanatic)
Wyvern Fury (Fanatic)
Legendary Red (Fanatic)
Alpha Blue (Fanatic)
Agate Skin (Fanatic)
Barbarian Flesh (Fanatic)
Dorado Skin (Fanatic)
CITADEL:
Liberator Gold (Layer)
VARNISH:
Colour Forge Matt Varnish Spray
THE BASE: Layer of PVA followed by sand, painted first with Brown Sand, heavily overbrushed Stone Grey, very lightly drybrushed with Green Grey (971) - the really bright one! Add tiny dots of PVA and static grass.
Marine Juice MkIV/Sonic Tonic:
3 parts Dark Tone (Army Painter Wash)
3 parts Reikland Fleshshade (Citadel Shade)
4 parts Lahmian Medium (Citadel Technical)
...or just mix a bottle of each together and done!")
![Painting Orlock Miniatures for Grimdark Future: Firefight - Gang Wars! [How I Paint Things]](https://i.ytimg.com/vi/j9O__Z6akxg/mqdefault.jpg "Painting Orlock Miniatures for Grimdark Future: Firefight - Gang Wars! [How I Paint Things]
I do feel a little silly to have made a big deal out of doing something new and then immediately hitting the ground running with a Games Workshop miniature, but thats whats caught my eye at the moment - Necromunda on the horizon means my brains deep in the underhive! That said, the OPR Grimdark Future Firefight and campaign compendium make for compelling, easy to pick up games as well. The bolt-on elements of the rules and campaign mean you can get as granular as you like with the system, which is nice, and the core of GFF literally is free to try, with all the army lists available direct from OPR themselves.
https://onepagerules.com/ has links to everything youll need and more!
00:00 - Intro
01:20 - Priming Notes
01:57 - Basecoats
08:58 - Shading/Washes
12:43 - Highlights & Finishing Touches
17:51 - The Finished Gang Leader
Thanks to Producer Patrons Alan, Kyrie, Andrew, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, Chris, and Timothy Ferguson - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
Backdrop by Jon Hodgson Backdrops - https://handiwork.games/product-category/everything/backdrop-books #jhbackdrops everywhere a hashtag works for more!
PAINTS USED
PRIMER: Ash Grey (Army Painter Spray)
ARMY PAINTER:
Thunderous Blue (Fanatic)
Moonstone Skin (Fanatic)
Grey Castle (Fanatic)
Bleached Strap Grey (Historical)
Gun Metal (Fanatic)
Daemonic Yellow (Fanatic)
Ruddy Terra (John Blanche)
Matt White (Fanatic)
Matt Black (Fanatic)
Rust Tone (Wash)
Radiation Glow (Effect)
Stratos Blue (Fanatic)
Great Hall Grey (Fanatic)
Barbarian Flesh (Fanatic)
Fresh Rust (Effect)
Verdigris (Effect)
Plate Mail Metal (Fanatic)
VALLEJO:
Umber Wash (Game Color)
VARNISH:
Matt Varnish (Army Painter Spray)")
![Painting Wargames Atlantic Great War French [How I Paint Things]](https://i.ytimg.com/vi/jF0gJ3gVZAQ/mqdefault.jpg "Painting Wargames Atlantic Great War French [How I Paint Things]
Get your French infantry ready for battle in no time at all with a primer in the right colour, a drybrush, and some simple basecoats. No fuss whatsoever, easy to tidy up, and looks great on the table!
Wargames Atlantics French Infantry: https://wargamesatlantic.com/collections/great-war/products/french-infantry-1916-1940
Uniform and Equipment References: https://www.151ril.com/
Turnip28 Slimy Trench Basing: https://www.youtube.com/watch?v=m7zH1_KwLwE
00:00 - Intro
01:00 - Priming Notes
01:39 - What was Horizon Blue?
03:03 - Basecoats
13:06 - Shading
14:48 - Highlights & Finishing Touches
17:02 - Le Poilu Fini
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Robison, Woodcock, David Kinney, and Matt Dischner - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://twitter.com/sonicsledge
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/docwholigan
http://exit23.games
THE BASE: Layer of PVA followed by sand, painted first with Flat Brown, heavily overbrushed Brown Sand, lightly drybrushed Dark Sand. Add dots of PVA and static grass, then tufts of your choice - these orange meadow tufts came from Green Stuff World. While drybrushing the base, once most of the paint is rubbed off your brush, lightly stipple at legs and greatcoat to add a bit of dust to the uniform.
PAINTS USED:
PRIMER: Wolf Grey (Army Painter Spray)
CITADEL:
Fenrisian Grey (Layer)
Iron Hands Steel (Base)
Cadian Fleshtone (Layer)
Kislev Flesh (Layer)
VALLEJO:
Grey Blue (Model Color 943)
Light Sea Grey
Green Ochre
Beige Brown
German Fieldgrey
Flat Brown
German Camo Black Brown
German Grey
ARMY PAINTER:
Tanned Flesh
Skeleton Bone
Wolf Grey
Thunderous Blue")
![Crimson Fists - Quick, Bold Blue Space Marines [How I Paint Things]](https://i.ytimg.com/vi/jJg1ZwJGPbc/mqdefault.jpg "Crimson Fists - Quick, Bold Blue Space Marines [How I Paint Things]
In the video I mention being able to dull down the armor slightly if you do like the darker look, and I decided to test that myself. Check out the Instagram post with the Finished+ look, along with instructions here: https://www.instagram.com/p/DU5SKf4jAJ3/
The Warpaints Fanatic conversion chart with comparisons to both the old Warpaints range and a few of the Citadel range is here: https://thearmypainter.com/en-de/blogs/explore/the-warpaints-fanatic-colour-conversion-chart
And, should you need it... though it pains me due to how old it is, this is the original Crimson Fists guide: https://www.youtube.com/watch?v=tsfngDW0Bxs
00:00 - Intro
00:57 - Priming Notes
02:57 - The Blue Armour Recipe
07:25 - More Basecoats
13:05 - Washes
14:29 - Gems & Plasma
15:49 - Highlights
19:45 - The Finished Marine
Thanks to Producer Patrons Alan, Kyrie, Andrew, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, Chris, and Timothy Ferguson - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
Backdrop by Jon Hodgson Backdrops - https://handiwork.games/product-category/everything/backdrop-books #jhbackdrops everywhere a hashtag works for more!
PAINTS USED
PRIMER: Raven Black (Colour Forge Spray)
ARMY PAINTER:
Oak Brown (Fanatic)
Imperial Navy (Fanatic)
Regal Blue (Fanatic)
Arctic Gem (Fanatic)
Wyvern Fury (Fanatic)
Dragon Red (Fanatic)
Tomb King Tan (Fanatic)
Tigers Eye Skin (Fanatic)
Gun Metal (Fanatic)
Ironclad Grey (Fanatic - John Blanche)
Matt Black (Fanatic)
Matt White (Fanatic)
Temple Gate Teal (Fanatic)
True Copper (Fanatic)
Dark Tone (Fanatic Wash)
Strong Skin Tone (Fanatic Wash)
Speedpaint Medium
Plasma Coil Glow (Effect)
Poppy Red (Speedpaint)
Magic Blue (Speedpaint)
Skeleton Bone (Fanatic)
Angelic Red (Fanatic)
Topaz Skin (Fanatic)
Jasper Skin (Fanatic)
Plate Mail Metal (Fanatic)
THE BASE: Apply a thick layer of GW Stirland Mud then heavily drybrush with AP Burning Ore, and lightly with AP Dorado Skin. Catch the edges of the stonework with the last bits of paint on your brush as you work. Add tufts to taste and done!")
![The Siege of Vos-Phorax: The Imperial Trench Devils [How I Paint Things]](https://i.ytimg.com/vi/jP2rzm0nRLs/mqdefault.jpg "The Siege of Vos-Phorax: The Imperial Trench Devils [How I Paint Things]
The Siege of Vos-Phorax: The Imperial Trench Devils [How I Paint Things]")
