Plan C | Blackout Mini H Quad Step-by-Step Full Build Log Part 5 @Plan-C | Uploaded May 2015 | Updated October 2024, 9 minutes ago.
Part 5 of my full build log for Blackout Mini H Quad with GPS, Minim OSD, Boscam 32ch vTX. The setup is cppm and outputs rssi to OSD. This part goes in detail about all wiring of FPV gear, battery monitor & buzzer, RSSI connections to MinimOSD, how to muffle baro to get accurate altitude readings, GPS wiring and auto-config in Cleanflight, how to insulate FPV antenna from conducting to carbon frame, weatherproofing ESCs (and their becs, which power everything) with CorrosionX, Transmitter commands for calibrating gyros, accelerometers and magnetometer remotely without having to plug in USB (mode 2 TX), config UARTS for GPS, basic GPS setup, magnetic declination, motor_stop, min/max throttle and min command, vbatt monitor settings and calibration. Final video will be how to manually configure flash-capable UBlox GPS units through UCentre, quick overview of flight modes and 9XR settings and some flight footage of GPS Home and GPS Hold tests.
Part 5 of my full build log for Blackout Mini H Quad with GPS, Minim OSD, Boscam 32ch vTX. The setup is cppm and outputs rssi to OSD. This part goes in detail about all wiring of FPV gear, battery monitor & buzzer, RSSI connections to MinimOSD, how to muffle baro to get accurate altitude readings, GPS wiring and auto-config in Cleanflight, how to insulate FPV antenna from conducting to carbon frame, weatherproofing ESCs (and their becs, which power everything) with CorrosionX, Transmitter commands for calibrating gyros, accelerometers and magnetometer remotely without having to plug in USB (mode 2 TX), config UARTS for GPS, basic GPS setup, magnetic declination, motor_stop, min/max throttle and min command, vbatt monitor settings and calibration. Final video will be how to manually configure flash-capable UBlox GPS units through UCentre, quick overview of flight modes and 9XR settings and some flight footage of GPS Home and GPS Hold tests.