Uploaded May 2024 | Updated September 2026, 2 weeks ago
One last connection!
Help support this channel! patreon.com/Needitmakeit
In the previous several videos we created quite a few different connections for joining 3D printed parts together and none of them used any fasteners or adhesive. In this video we're going to create a connection with fasteners, except, it's no ordinary connection with fasteners, it'll have a very unusual shape which provides lots of contact area, aligns itself in multiple directions simultaneously, and it is is going to be pulled together tight.
The purpose of this video isn't just about the connection, it's about exploring different ideas and methods within Fusion360 so that we can open up more options for design.
For this video, I've used the Bambu X1C, the filament was Bambu PETG-CF in Brick Red and in Titan Grey linked below (I receive a small commission if purchased through my link and it helps me continue to make videos like these):
ca.store.bambulab.com/collections/bambu-lab-3d-printer-filament?sscid=61k8_gdfh0
Fusion Files:
Screwed Scarf - drive.google.com/file/d/1rT-HOYWB5hkIKtImjMIg2agw5qGcBcaP/view?usp=sharing
Sine Wave - drive.google.com/file/d/14NQjnleLaZWRNtiIbzy2AvDVjWvQxSVK/view?usp=sharing
Scissor Lap - drive.google.com/file/d/1vuALaV8Bw66d3JLS6nLf7I9lX7sklyju/view?usp=sharing
If you'd like to see more connections, let me know.
One way to support this channel is through my affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support!
#1 Core XY - Best bang-for-buck
QIDI Q1 Pro - qidi3d.com/products/q1-pro?sca_ref=5735403.eknTRISP1e
This printer isn't as full featured as the X1C, but it is very capable and very precise. It also has a heated chamber and can reach higher hot end temps.
#2 Core XY - Most features with great results but Pricey $$
Bambu X1C - shrsl.com/4j1gz
Panda Jet For Bambu P1 and X1 Series (Tested and proven to work well)
PANDA JET: shrsl.com/4jhht
NEW MIC (I bought this)
amzn.to/3vcMKAr - Rode Wireless ME mic (Saved me about 4+ hours/vid)
amzn.to/3NBFvZe - Mag clip (Super handy, but a little pricy)
#3dprinting
#x1c
#strong
One last connection!
Help support this channel! patreon.com/Needitmakeit
In the previous several videos we created quite a few different connections for joining 3D printed parts together and none of them used any fasteners or adhesive. In this video we're going to create a connection with fasteners, except, it's no ordinary connection with fasteners, it'll have a very unusual shape which provides lots of contact area, aligns itself in multiple directions simultaneously, and it is is going to be pulled together tight.
The purpose of this video isn't just about the connection, it's about exploring different ideas and methods within Fusion360 so that we can open up more options for design.
For this video, I've used the Bambu X1C, the filament was Bambu PETG-CF in Brick Red and in Titan Grey linked below (I receive a small commission if purchased through my link and it helps me continue to make videos like these):
ca.store.bambulab.com/collections/bambu-lab-3d-printer-filament?sscid=61k8_gdfh0
Fusion Files:
Screwed Scarf - drive.google.com/file/d/1rT-HOYWB5hkIKtImjMIg2agw5qGcBcaP/view?usp=sharing
Sine Wave - drive.google.com/file/d/14NQjnleLaZWRNtiIbzy2AvDVjWvQxSVK/view?usp=sharing
Scissor Lap - drive.google.com/file/d/1vuALaV8Bw66d3JLS6nLf7I9lX7sklyju/view?usp=sharing
If you'd like to see more connections, let me know.
One way to support this channel is through my affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support!
#1 Core XY - Best bang-for-buck
QIDI Q1 Pro - qidi3d.com/products/q1-pro?sca_ref=5735403.eknTRISP1e
This printer isn't as full featured as the X1C, but it is very capable and very precise. It also has a heated chamber and can reach higher hot end temps.
#2 Core XY - Most features with great results but Pricey $$
Bambu X1C - shrsl.com/4j1gz
Panda Jet For Bambu P1 and X1 Series (Tested and proven to work well)
PANDA JET: shrsl.com/4jhht
NEW MIC (I bought this)
amzn.to/3vcMKAr - Rode Wireless ME mic (Saved me about 4+ hours/vid)
amzn.to/3NBFvZe - Mag clip (Super handy, but a little pricy)
#3dprinting
#x1c
#strong
