A fatal esptool.py error occurred: Cannot configure port on ESP32/ESP8266 @ObengwareID
A fatal esptool.py error occurred: Cannot configure port on ESP32/ESP8266  @ObengwareID
Uploaded October 2026 | Updated November 2026, 1 day ago
If you are trying to upload code to your ESP32 or ESP8266 board using Arduino IDE on Windows 11 and you get the dreaded "A fatal esptool.py error occurred: Cannot configure port" error, this video is for you.

In this video, we walk through the exact steps to diagnose and fix this issue, starting with the most common culprit: the CH340 USB-to-serial driver. We show you how to properly uninstall the problematic driver, download the correct version, and reinstall it to get your uploads working again.

00:00 The error: "Cannot configure port" on Windows 11
00:33 Suspect 1: The CH340 driver
01:39 Install the downloaded driver
02:14 Upload works after reinstall

Official WCH Driver (CH340/CH341):
CH341SER.ZIP (Official WCH Site): https://www.wch.cn/downloads/CH341SER_ZIP.html
CH341SER.EXE (Official WCH-IC Mirror): wch-ic.com/downloads/CH341SER_EXE.html

Older CH340 Driver (2016/11/30 version – often fixes Windows 11 conflicts):
Search for "Windows-CH340-Driver.ZIP 2016/11/30".

Other Common Causes for Upload Failures
1. Board Not in Bootloader Mode (Auto-Reset Failure)
Some ESP32 boards cannot be reset automatically by esptool.py. This causes the upload to hang and fail.
Fix: Manually put the board into bootloader mode: Press and hold the BOOT button, then press and release the RESET button, then release the BOOT button. After this, try uploading again.

2. USB Cable Issues
A charge-only USB cable (without data wires) will let the board power on and the COM port may appear, but uploads will fail.
Fix: Use a different, known-good data-capable USB cable.

3. Port Busy or Permission Issues
Another program (like a Serial Monitor or another IDE) may be holding the COM port open, or Windows may lack permission.
Fix: Close all other programs that might use the port. Try restarting the Arduino IDE or even rebooting your computer. On Linux, add your user to the dialout group.

4. Power Supply Problems
The USB port on your computer may not supply enough current, especially for boards with many peripherals or ESP32-CAM modules.
Fix: Try a different USB port (preferably USB 2.0), use a powered USB hub, or power the board externally.

5. esptool.py Version Bugs
Certain versions of esptool.py (e.g., v4.5.1) have known issues with specific boards. Updating the ESP32 board package in Arduino IDE or manually replacing esptool.py can help
#ESP32 #ArduinoIDE #CannotConfigurePort
A fatal esptool.py error occurred: Cannot configure port on ESP32/ESP8266Clover Boot Manager cant boot wifh Flash Disk and NVMe PCIe adapterHow to make AV1 video format with Vegas proArduino Nano Upload Error Fail Uploading Exit Status 1 problem USB driver not codingHow to Boot Windows from NVMe PCIe Adapter on Older MotherboardsSetting Secure DNS in Windows 11 and BrowserRender Sweet Home 3D more realisticReplace the small heatsink on Amlogic CPU with a higher-performance coolerMouse cant click on Android TV change with GBoardMod Sonoff to Tasmota from 1 switch to 4 switchHow to replace a bicycle chain using a quick linkModul Charging  AC01 TP4056  Step Up voltage 5V DC other model HW 357 J5019
Obengplus com |

A fatal esptool.py error occurred: Cannot configure port on ESP32/ESP8266

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER