80/20: 8" Robot Mounting Plate 40001-CP @8020llc

Uploaded December 2023 | Updated September 2026, 1 week ago

To Purchase: bit.ly/3S42grT
Find in Catalog: bit.ly/428g7iZ
80/20 Website: bit.ly/3peM7n3

The 40001-CP mounting plate is compatible with Universal Robots® - UR3, UR5, UR10, UR16, Fanuc® - CRX-5iA, CRX-10iA, CRX-20iA, Doosan® - A0509, A0912, E0509, M0609, M0617, M1013 and Techman Robot® & Omron® - TM5-700, TM5-900 collaborative robots (cobots).

Precise robot placement with dowel pin holes
Compatible with 80/20’s 40 series profiles & parts
Countersunk holes for a variety of mounting options
Center thru hole for electrical and pneumatic lines
Connect directly to 80/20’s robot pedestals

$80/20: Enclosed Corner Bracket Overview To Purchase: https://bit.ly/43GeMQC Find in Catalog: https://bit.ly/428g7iZ 80/20 Website: https://bit.ly/3peM7n3 Hello, and welcome to 80/20s product highlight series. Today were going to take a look at the enclosed corner bracket. Theyre easy to install, require no machining, and are available in both fractional and metric. When using it, you have a choice. The enclosed corner bracket can be used as a stand alone fastening method, or to reinforce another fastening method. Here you can see a small sample of the enclosed corner brackets that 80/20 offers. Now one thing youre going to want to keep in mind when using the enclosed corner bracket is youll need bolt assemblies to install it. Recommended bolt assemblies for all enclosed brackets can be found in the 80/20 product catalog. Now when it comes to installing the enclosed corner bracket, the first thing youre going to want to do is preload your hardware. Preloading not only makes it easier to install your bracket, but also saves you time during assembly. Now to get started, well take this bracket and put one last bolt and one last T-nut into it. Now its important when youre putting the T-nut in, to make sure the pilot projection is facing away from the bracket. Get that right on there. Well take our first bar and slide the bracket right on. Well get that into place. Well take our other bar and slide it on to the other half of the bracket. Once we have all that lined up, well take our wrench, and simply tighten down the bolts. From here we have a strong, secure, external connection. Now one last option you may want to consider is a cover cap. Simply goes right over the bracket and pops right on for a smooth clean connection. Now hopefully you have found this segment on the enclosed corner bracket helpful. For more information visit 8020.net and make sure to subscribe to future 80/20 videos. And as always, make it a great day.$ $80/20: Gravity Roller Mounting Block Overview To Purchase: https://bit.ly/3CCwlWm Find in Catalog: https://bit.ly/428g7iZ 80/20 Website: https://bit.ly/3peM7n3 Hello and welcome to 80/20’s product highlight series. Today we’re going to take a look at gravity roller mount block. This mounting block allows you to mount a gravity roller, to a Tslot profile. It’s easy to install, available in both fractional and metric, and compatible across a wide range of profile series. However, a bolt assembly will be required. More information on 80/20’s recommended bolt assemblies can be found in the 80/20 product catalog. Now to install it. We’ll take our block, put a bolt and Tnut on it. Get that on there. Take our profile, and drop our block right into the profile. We’ll just tighten that down with our wrench. From there, we’ll just take our gravity roller, and rest it right into the block. From there, we’ll take our other half, and do the same thing. And we’ll put our gravity roller to use. Now hopefully you found this segment on gravity roller mounting block helpful. For more information please visit 8020.net and be sure to subscribe to future 80/20 videos. And as always, make it a great day.$

80/20: Double Slide-in Economy T-nut (3279)

$80/20: Deluxe Handles Overview Deluxe: https://bit.ly/3XZzKID Furniture Style: https://bit.ly/3JXulfh Find in Catalog: https://bit.ly/428g7iZ 80/20 Website: https://bit.ly/3peM7n3 Hello and welcome to 80/20’s product highlight series. Today we are going to take a look at deluxe and furniture handles. These handles mount direct to the T-slot, and are a great finishing touch to any door. They are easy to install and available in both fractional and metric. These door handles are available in both chrome and black style finishes, locking, non-locking, clockwise and counterclockwise turns, and several different styles to suit your project’s needs. No matter your choice, all recommended mounting hardware comes with the handle. However, machining will need to be done to your bar, just like this. To get started we are going to take our handle and our frame. We’re going to feed our handle right through the frame. Take our bolts, feed those thru. We’ll go ahead and tighten those down, and once we have those tightened down, we’re going to move to the inside. Take a washer and slide it right over the stem. Take a paw kit, and slide it right over the stem as well. Now once you have that on there, all you need to do is take a flat head screwdriver and tighten down that setscrew. Once you have that tightened, your handle is ready for use. Now one last thing you may want to consider is an additional handle for the inside. You simply loosen this little setscrew on it, slide it onto the stem, you’ll go ahead and tighten down that set screw, and you’ll have a handle for both sides of your frame. Now hopefully you found this segment on furniture and deluxe handles helpful. For more information, please visit 8020.net and be sure to subscribe to future 80/20 videos. And as always, make it a great day.$

$80/20: Gusset Corner Bracket Overview To Purchase: https://bit.ly/3OqNx8l Find in Catalog: https://bit.ly/428g7iZ 80/20 Website: https://bit.ly/3peM7n Hello, and welcome to 80/20s Product Highlight Series. Today were going take a look at the Gusset Corner Bracket. 80/20s gussets are not only easy to install but require no machining. They come in both fractional, metric, and are available across a wide range of profile series. When using it, you have a choice. A gusset can be used as a stand-alone fastening method, or to reinforce another fastening method. Here we can see a small sample of the gussets 80/20 offers. As you can see, it comes in a wide variety of shapes, and sizes, making it one of the more versatile fastening methods that 80/20 offers. Now one thing youll want to keep in mind when using the gusset, is youll need bolt assemblies to install it. Recommended bolt assemblies for all gussets can be found in the 80/20 product catalog. Now when it comes to installing your gusset bracket, the first thing youre going to want to do is preload your hardware. Preloading not only makes it easier to install your gusset, but also saves time during assembly. To save additional time and money, youll want to look for opportunities to substitute out a single T-nut for a double T-nut like in this example. Now to get started well take our gusset with the preloaded hardware on it, and finish it up with one last bolt and one last T-nut. Now when installing the T-nut its important to know to face the pilot hole down, away from the gusset. Once we have that one there, were ready for our bars. Well slide the gusset right onto our first bar. Well take our second bar, and slide it right onto the gusset as well. Well take our wrench and tighten down. Once you have that tightened you have a strong, secure connection. Now hopefully you found this segment on the corner gusset bracket helpful. For more information, visit 8020.net and make sure to subscribe to future 80/20 videos. And as always, make it a great day.$ $80/20: Locking Door Grabber Overview To Purchase: https://bit.ly/3Xo9N5t Find in Catalog: https://bit.ly/428g7iZ 80/20 Website: https://bit.ly/3peM7n3 Hello and welcome to 80/20’s product highlight series. Today we’re going to take a look at the locking grabber handle. This handle combines a slam action latch, a handle, and a lock into one convenient unit. It’s easy to install and it’s available in both fractional and metric. Now the handle does come with all recommended mounting hardware, however, your panel is going to need a machining service in it. More information on 80/20’s machining services can be found in the 80/20 product catalog. Now when it comes to installing it, you’ll take the locking portion first. Put it into the panel. You’ll take the backing plate, and slide it onto the backside, and we’ll sandwich the panel right in between them. You’ll take your screws and start hand tightening them down. Get that bottom one on there. From there, you’ll take your Phillips screwdriver, and tighten those down. Now the last thing you’ll want to do is move your strike plate into position. We’ve got ours preloaded into the T-slot already. So we’ll line it up with the latch, we’ll take our wrench, we’ll just tighten that down. Once you have the locked into place, you have a strong secure connection. Now one other thing you’ll want to note is that there is a lever on the inside so you can open it from either direction. Now hopefully you found this segment on the locking grabber handle helpful. For more information, please visit 80/20.net, and make sure to subscribe for future 80/20 videos. And always, make it a great day.$