80/20: R40 Track Mount Start (R40-MS) @8020llc

Uploaded April 2024 | Updated September 2026, 1 week ago

To Purchase: bit.ly/3JifF9U
Find in Catalog: bit.ly/428g7iZ
80/20 Website: bit.ly/3peM7n3

-Electric conductivity (ESD)
-Serves as an anchor between the roller track and a perpendicular pipe.
-Works with all Steel Roller Track Narrow

$80/20: Gusset Corner Bracket Overview To Purchase: https://bit.ly/3OqNx8l Find in Catalog: https://bit.ly/428g7iZ 80/20 Website: https://bit.ly/3peM7n Hello, and welcome to 80/20s Product Highlight Series. Today were going take a look at the Gusset Corner Bracket. 80/20s gussets are not only easy to install but require no machining. They come in both fractional, metric, and are available across a wide range of profile series. When using it, you have a choice. A gusset can be used as a stand-alone fastening method, or to reinforce another fastening method. Here we can see a small sample of the gussets 80/20 offers. As you can see, it comes in a wide variety of shapes, and sizes, making it one of the more versatile fastening methods that 80/20 offers. Now one thing youll want to keep in mind when using the gusset, is youll need bolt assemblies to install it. Recommended bolt assemblies for all gussets can be found in the 80/20 product catalog. Now when it comes to installing your gusset bracket, the first thing youre going to want to do is preload your hardware. Preloading not only makes it easier to install your gusset, but also saves time during assembly. To save additional time and money, youll want to look for opportunities to substitute out a single T-nut for a double T-nut like in this example. Now to get started well take our gusset with the preloaded hardware on it, and finish it up with one last bolt and one last T-nut. Now when installing the T-nut its important to know to face the pilot hole down, away from the gusset. Once we have that one there, were ready for our bars. Well slide the gusset right onto our first bar. Well take our second bar, and slide it right onto the gusset as well. Well take our wrench and tighten down. Once you have that tightened you have a strong, secure connection. Now hopefully you found this segment on the corner gusset bracket helpful. For more information, visit 8020.net and make sure to subscribe to future 80/20 videos. And as always, make it a great day.$ $80/20: Locking Door Grabber Overview To Purchase: https://bit.ly/3Xo9N5t Find in Catalog: https://bit.ly/428g7iZ 80/20 Website: https://bit.ly/3peM7n3 Hello and welcome to 80/20’s product highlight series. Today we’re going to take a look at the locking grabber handle. This handle combines a slam action latch, a handle, and a lock into one convenient unit. It’s easy to install and it’s available in both fractional and metric. Now the handle does come with all recommended mounting hardware, however, your panel is going to need a machining service in it. More information on 80/20’s machining services can be found in the 80/20 product catalog. Now when it comes to installing it, you’ll take the locking portion first. Put it into the panel. You’ll take the backing plate, and slide it onto the backside, and we’ll sandwich the panel right in between them. You’ll take your screws and start hand tightening them down. Get that bottom one on there. From there, you’ll take your Phillips screwdriver, and tighten those down. Now the last thing you’ll want to do is move your strike plate into position. We’ve got ours preloaded into the T-slot already. So we’ll line it up with the latch, we’ll take our wrench, we’ll just tighten that down. Once you have the locked into place, you have a strong secure connection. Now one other thing you’ll want to note is that there is a lever on the inside so you can open it from either direction. Now hopefully you found this segment on the locking grabber handle helpful. For more information, please visit 80/20.net, and make sure to subscribe for future 80/20 videos. And always, make it a great day.$

80/20: 3 Color Andon Light with Audible (21003)

80/20: End Cap with Push-In Fastener (2015-PLAIN)

$80/20: End Caps Overview To Purchase: https://bit.ly/43L8qPZ Find in Catalog: https://bit.ly/428g7iZ 80/20 Website: https://bit.ly/3peM7n3 Hello and welcome to 80/20’s product highlight series. Today we’re going to take a look at end caps. These end caps are a perfect finishing touch for any project. Giving it a nice, clean, aesthetic look. They’re easy to install. They’re available in both fractional and metric, and compatible across a wide range of profile series. They’re also available in a wide variety of colors, and you can get them with or without lettering. Now these come in a couple different styles. One with a hole in the middle of it, so you can put it right over the end of the profile. Take a push pin, push it right into the middle of the profile, and hold it securely into place. Now you can also use a self tapping screw, which will bite into the aluminum for a secure connection. Now we have two other styles. One has a stem built into the back of it, that’s going to work just like your push in pin. Another one uses a set screw that when you tighten it down it will expand the stem on the back of the end cap, securing it to your bar. Now hopefully you found this segment on end caps helpful. For more information please visit 8020.net and be sure to subscribe to future 80/20 videos. And as always, make it a great day.$

80/20: 10 Series Gusseted Inside Corner Bracket (4132)

$80/20: Angle Plates Overview To Purchase: https://bit.ly/45Q1LpC Find in Catalog: https://bit.ly/428g7iZ 80/20 Website: https://bit.ly/3peM7n3 Hello, and welcome to 80/20s product highlight series. Today we are going to take a look at angle plates. The plates are perfect for joining two bars at an angle. 80/20s angle plates are not only easy to install, but also require no machining. They come in fractional, metric, and are available across a wide range of profile series. Here you can see a small sample of the angle plates that 80/20 offers. As you can see there is a wide variety of shapes, angles, and sizes, making it one of the more versatile fastening options 80/20 offers. Now one thing youll want to keep in mind when using angle plates is that you are going to need a bolt assembly to install it. Recommended bolt assemblies for all angle plates can be found in the 80/20 product catalog. Now when it comes to installing the angle plate, the first thing you are going to want to do is preload your hardware. Preloading not only makes it easier to install your angle plate, but also saves time during assembly. To save additional time, youre going to want to look for opportunities where you can substitute out a single T-nut, for a double T-nut. Now to get started, well take our angle plate that is partially preloaded and finish it up with one last bolt, and one last T-nut. Now the important thing with the T-nut, is to make sure the pilot hole is facing downward. Once we have that on there, well take our profile, and slide the angle plate on. Well get one half of it on there. Tighten it down. Well take our other profile, and slide it right onto the other half of the angle plate. Once we have that in there, well take our wrench, and tighten down the last two bolts. Once you have that tightened, you have a strong, secure connection. Now hopefully you have found this segment on the angle plates helpful. For more information, visit 8020.net and make sure to subscribe to future 80/20 videos. And as always, make it a great day.$