Uploaded June 2015 | Updated September 2026, 2 weeks ago
Printing an Aztec Chief on my Ultimaker 2!
Filament : Ultra Marine Blue by colorFabb
Model : Aztec Chief by MakerBot
Thingiverse: thingiverse.com/thing:205869
Music by FamilyJules7x
FamilyJules7x.com
0.25mm Nozzle,
Printed at scale,
layer height 0.1 mm,
50 mm/s,
15% infill,
220c on nozzle,
60c on the bed,
fan at 50%.
As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)
Cool little dude! Came out great! Wanted to get the max out of the detail in the model hence why i used the 0.25mm nozzle.
Follow me on twitter @Multimaker3D
And like and subscribe right here for more 3D Printing videos!
Please comment and i will answer, reach out on twitter for a faster response.
Printing an Aztec Chief on my Ultimaker 2!
Filament : Ultra Marine Blue by colorFabb
Model : Aztec Chief by MakerBot
Thingiverse: thingiverse.com/thing:205869
Music by FamilyJules7x
FamilyJules7x.com
0.25mm Nozzle,
Printed at scale,
layer height 0.1 mm,
50 mm/s,
15% infill,
220c on nozzle,
60c on the bed,
fan at 50%.
As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)
Cool little dude! Came out great! Wanted to get the max out of the detail in the model hence why i used the 0.25mm nozzle.
Follow me on twitter @Multimaker3D
And like and subscribe right here for more 3D Printing videos!
Please comment and i will answer, reach out on twitter for a faster response.
