Uploaded February 2015 | Updated September 2026, 2 weeks ago
Printing a Superman Logo Pendant on my Ultimaker 2 and I experiment with polishing it.
Filament : Bronzefill by colorFabb
Model : Superman Logo Pendant by ashleywebster
YouMagine :
youmagine.com/designs/superman-logo-pendant
Music : Title, MM2 and Mega Man Title Theme Medley by MegaRock
Printed at scale,
layer height 0.2 mm,
50 mm/s,
100% infill,
220c on nozzle,
60c on the bed,
fan at 100% from 0,5mm up.
As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)
But beware!!! Do NOT use much hairspray with this filament! Maybe not at all(on heated bed)! It stuck to my build plate like hell!!
On the plus side there's no way this will ever come loose during a print ;-)
My first attempt with Bronzefill, and i am satisfied.
It feels great! Very heavy and has a real hi-quality feel.
Using a Dremel to polish this material is not recommended! Even at the slowest speed with a very soft tool it digs down and creates an ugly surface! The green stuff helped but not enough, i don't know if it's even for that... I haven't tried any bronze polishing products yet.
Follow me on twitter @Multimaker3D
And like and subscribe right here for more 3D Printing videos!
Please comment and i will answer, reach out on twitter for a faster response.
Printing a Superman Logo Pendant on my Ultimaker 2 and I experiment with polishing it.
Filament : Bronzefill by colorFabb
Model : Superman Logo Pendant by ashleywebster
YouMagine :
youmagine.com/designs/superman-logo-pendant
Music : Title, MM2 and Mega Man Title Theme Medley by MegaRock
Printed at scale,
layer height 0.2 mm,
50 mm/s,
100% infill,
220c on nozzle,
60c on the bed,
fan at 100% from 0,5mm up.
As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)
But beware!!! Do NOT use much hairspray with this filament! Maybe not at all(on heated bed)! It stuck to my build plate like hell!!
On the plus side there's no way this will ever come loose during a print ;-)
My first attempt with Bronzefill, and i am satisfied.
It feels great! Very heavy and has a real hi-quality feel.
Using a Dremel to polish this material is not recommended! Even at the slowest speed with a very soft tool it digs down and creates an ugly surface! The green stuff helped but not enough, i don't know if it's even for that... I haven't tried any bronze polishing products yet.
Follow me on twitter @Multimaker3D
And like and subscribe right here for more 3D Printing videos!
Please comment and i will answer, reach out on twitter for a faster response.
