$2 DIY 3D Printed Shot Mirror @jkimmakes

Uploaded January 2022 | Updated September 2026, 3 hours ago

A cheap diy shot mirror ball mount that can be 3d printed. Would recommend you source nicer mirrors than the ones I used in this video.

STLs available on thingiverse: thingiverse.com/thing:5181353
Cheap mirrors: aliexpress.com/item/32344881206.html
Car mount: aliexpress.com/item/32975340176.html

Installing and Aligning SSP V1 Cast Burrs into a Fellow Ode

Filter 2.0 on a Slayer modded Breville Dual Boiler

Baca Drops: Easy Water Dialing for Espresso

$Smart Manual Lever Machine from the Future This is Shays (of caffeinated.science) customized pid controlled open boiler lever espresso machine. With it, the beanconqueror app, and a smart scale, I can record full pressure and output profiles. Pressure profiles are recorded using the Popsicle, a custom built bluetooth pressure transducer designed by Mike and Shay. The Popsicle uses a commonly available automotive pressure transducer coupled to a bluetooth capable board and custom battery management software. Altogether, this is one of the most advanced machines you can get at a fraction of the cost. Shay and Mike are always doing crazy things. Follow Shays blog at https://www.caffeinated.science/ or his instagram: https://www.instagram.com/caffeinated.science/?hl=en Find Mike (@Misha) on https://discord.gg/espresso I highly recommend the BeanConqueror App. Its an easy way to standardize data gathering for coffee brewing and its really helpful if you want to track changes over time. https://beanconqueror.com/ Check out Brian Quans original video if you want to learn more about the Jian-Yi https://www.youtube.com/watch?v=HdobC12eKD4$

1 Micron Grinder Adjustments with Vernier Mods

Dialing Espresso: Custom Water Recipes #1

How to Make and Use Bottom Paper Filters for Espresso

Lagom P100 by Option-O: Unboxing, Impressions and First Shot

jkim makes |

$2 DIY 3D Printed Shot Mirror