WDT Needle Thickness Tested @jkimmakes

Uploaded January 2022 | Updated September 2026, 3 hours ago

A video comparing 0.25mm, 0.3mm, 0.35mm and 0.4mm acupuncture needles for performing Weiss Distribution Technique (WDT) for espresso puck preparation.

Chapters
00:00 Introduction
01:58 0.25mm needles
03:40 0.3mm needles
04:41 0.35mm needles
05:29 0.4mm needles
07:10 Conclusions

Installing and Aligning SSP V1 Cast Burrs into a Fellow Ode

Filter 2.0 on a Slayer modded Breville Dual Boiler

Baca Drops: Easy Water Dialing for Espresso

$Smart Manual Lever Machine from the Future This is Shays (of caffeinated.science) customized pid controlled open boiler lever espresso machine. With it, the beanconqueror app, and a smart scale, I can record full pressure and output profiles. Pressure profiles are recorded using the Popsicle, a custom built bluetooth pressure transducer designed by Mike and Shay. The Popsicle uses a commonly available automotive pressure transducer coupled to a bluetooth capable board and custom battery management software. Altogether, this is one of the most advanced machines you can get at a fraction of the cost. Shay and Mike are always doing crazy things. Follow Shays blog at https://www.caffeinated.science/ or his instagram: https://www.instagram.com/caffeinated.science/?hl=en Find Mike (@Misha) on https://discord.gg/espresso I highly recommend the BeanConqueror App. Its an easy way to standardize data gathering for coffee brewing and its really helpful if you want to track changes over time. https://beanconqueror.com/ Check out Brian Quans original video if you want to learn more about the Jian-Yi https://www.youtube.com/watch?v=HdobC12eKD4$

1 Micron Grinder Adjustments with Vernier Mods

Dialing Espresso: Custom Water Recipes #1

How to Make and Use Bottom Paper Filters for Espresso

Lagom P100 by Option-O: Unboxing, Impressions and First Shot