Uploaded January 2023 | Updated September 2026, 5 hours ago

---

My Sister-in-Law broke a favorite brandy glass and asked us if we did glass engraving. I just got an XTool D1 Pro 20W laser to make stainless steel signs. So I decided to try to laser engrave glasses. That worked so nicely, I also bought a case of painted stainless steel thermos. They came out great too! Here is how I did it

Here are the things I used on this project:

Things used:
* XTOOL 20W Laser cutter/engraver ( amzn.to/3C1O3CM )
* XTOOL Honeycomb bed ( amzn.to/3I2ZduL )
* XTOOL Air Assist ( amzn.to/3Gok22s )
* XTOOL RA2 Rotation Stage ( amzn.to/3QwKw5l )
* Neodymium magnets ( amzn.to/3Q0xEnR )
* Lightburn Software ( amzn.to/3WRytln )
* Black Laser Marking Spray ( amzn.to/3hPhpO5 )
* IR Laser Goggles ( amzn.to/3C82XHQ )
* 20oz Stainless Steel Thermos Tumblers ( amzn.to/3WXSWFo )
Note: I used 50mm/sec at 60% power on my 20W blue laser
* Rock Glass and Tumblers ( amzn.to/3ZlY5Jb )

FTC Disclaimer: We may earn commissions for purchases made through the links below. As Amazon Associates we earn from qualifying purchases.