Uploaded October 2026 | Updated November 2026, 2 days ago
Learn how to install Hilti Firestop System W-L-1410, a UL/cUL tested firestop system designed for metallic membrane penetrations that only pass through one side of rated gypsum wall assemblies. This installation video demonstrates the proper installation of approved Hilti firestop sealants to help maintain the fire-resistance rating and reduce the movement of smoke through wall penetrations.
System W-L-1410 is approved for a variety of metallic penetrants, including steel pipe, cast or ductile iron pipe, steel conduit, EMT, copper tubing, and flexible steel conduit in 1-hour and 2-hour rated gypsum wall assemblies. The system achieves an L-Rating of less than 1 CFM/sq ft at both ambient and 400°F conditions.
System Highlights:
Supports steel pipe & conduit, cast iron pipe, and EMT up to 3 in. diameter
Supports copper pipe & tubing and flexible steel conduit up to 1 in. diameter
Approved for both wood stud and steel stud wall assemblies
Zero annular space capability for select configurations
Annular space up to 2 in. when using FS-ONE MAX sealant
Option to utilize Hilti FS-ONE MAX, CP 606, CFS-S SIL GG, or CP 618 firestop products
For complete installation requirements and system details, always refer to the UL listing and current Hilti technical documentation found on the Hilti Construction Platform – Firestop Selector: Firestop
#Hilti #Firestop #PassiveFireProtection #ULSystems #LifeSafety #FSONEMAX #CP606 #CFSSSILGG #CP618 #ConstructionSafety #BuildingSafety #Mechanical #Electrical #FirestopInstallation
Time Stamps
0:00 - Intro
0:07 – Gypsum wall assembly around existing pipe
0:26 – Firestop sealant/putty install around the pipe
0:31 – System overview and outro
Frequently Asked Questions (FAQ)
What is a UL firestop system?
A UL firestop system is a tested and listed assembly designed to help maintain the fire-resistance rating of a wall or floor after it has been penetrated by pipes, cables, conduits, ducts, or other building services.
Why is firestopping required?
Firestopping helps limit the spread of fire, smoke, and hot gases through fire-resistance-rated assemblies, supporting compartmentation and life-safety objectives.
What do the UL penetration system numbers mean?
UL penetration system numbers (such as W-L-3507, W-J-3298, or C-AJ-2835) identify a specific tested assembly that includes the construction type, penetrant, opening size, firestop materials, and installation requirements.
What do the UL joint system numbers mean?
UL joint system numbers (such as HW-D-0209, FW-D-1037, or BW-S-0002) identify a specific tested assembly that includes the construction assembly, type of joint, movement capability, joint width, firestop materials, and installation requirements.
Can I substitute products or change installation details?
No. Firestop systems should be installed exactly as tested and listed. Changes to products, dimensions, penetrant types, or assembly details may affect compliance and performance.
Where can I find the complete UL system details?
Always refer to the official UL listing and current Hilti technical documentation for complete installation requirements, limitations, and approved configurations.
What if my field condition does not match a tested system?
If no listed system matches the field condition, a Technical Evaluation also known as an Engineering Judgement (EJ) may be required. Hilti provides engineering support and EJ services through the Hilti Construction Platform: hcp.hilti.com
Who should use these installation videos?
These videos are intended for contractors, firestop specialty contractors, inspectors, designers, engineers, and anyone involved in firestop system installation or review.
Are these videos a replacement for the UL listing? No. These videos are visual installation aids only. The official UL system listing and applicable project documents govern the installation requirements.
How do I find the right firestop system for my application?
The Hilti Construction Platform Firestop Selector can help identify tested and listed firestop systems based on the penetrant type, assembly construction, fire rating, and other project conditions.
Where can I learn more about Hilti firestop systems?
Explore:
Hilti Construction Platform
hcp.hilti.com
Firestop Selector
firestop.hilti.com
Firestop Resource Center
hilti.com/content/landing-page/local/firestop-resource-center
Hilti Academy training resources for additional firestop documentation, training, and technical support
academy.hilti.com/learn/signin
#hilti #construction
➡️ Follow Hilti North America
instagram.com/hiltinorthamerica
facebook.com/hiltinorthamerica
linkedin.com/company/hilti-usa
Learn how to install Hilti Firestop System W-L-1410, a UL/cUL tested firestop system designed for metallic membrane penetrations that only pass through one side of rated gypsum wall assemblies. This installation video demonstrates the proper installation of approved Hilti firestop sealants to help maintain the fire-resistance rating and reduce the movement of smoke through wall penetrations.
System W-L-1410 is approved for a variety of metallic penetrants, including steel pipe, cast or ductile iron pipe, steel conduit, EMT, copper tubing, and flexible steel conduit in 1-hour and 2-hour rated gypsum wall assemblies. The system achieves an L-Rating of less than 1 CFM/sq ft at both ambient and 400°F conditions.
System Highlights:
Supports steel pipe & conduit, cast iron pipe, and EMT up to 3 in. diameter
Supports copper pipe & tubing and flexible steel conduit up to 1 in. diameter
Approved for both wood stud and steel stud wall assemblies
Zero annular space capability for select configurations
Annular space up to 2 in. when using FS-ONE MAX sealant
Option to utilize Hilti FS-ONE MAX, CP 606, CFS-S SIL GG, or CP 618 firestop products
For complete installation requirements and system details, always refer to the UL listing and current Hilti technical documentation found on the Hilti Construction Platform – Firestop Selector: Firestop
#Hilti #Firestop #PassiveFireProtection #ULSystems #LifeSafety #FSONEMAX #CP606 #CFSSSILGG #CP618 #ConstructionSafety #BuildingSafety #Mechanical #Electrical #FirestopInstallation
Time Stamps
0:00 - Intro
0:07 – Gypsum wall assembly around existing pipe
0:26 – Firestop sealant/putty install around the pipe
0:31 – System overview and outro
Frequently Asked Questions (FAQ)
What is a UL firestop system?
A UL firestop system is a tested and listed assembly designed to help maintain the fire-resistance rating of a wall or floor after it has been penetrated by pipes, cables, conduits, ducts, or other building services.
Why is firestopping required?
Firestopping helps limit the spread of fire, smoke, and hot gases through fire-resistance-rated assemblies, supporting compartmentation and life-safety objectives.
What do the UL penetration system numbers mean?
UL penetration system numbers (such as W-L-3507, W-J-3298, or C-AJ-2835) identify a specific tested assembly that includes the construction type, penetrant, opening size, firestop materials, and installation requirements.
What do the UL joint system numbers mean?
UL joint system numbers (such as HW-D-0209, FW-D-1037, or BW-S-0002) identify a specific tested assembly that includes the construction assembly, type of joint, movement capability, joint width, firestop materials, and installation requirements.
Can I substitute products or change installation details?
No. Firestop systems should be installed exactly as tested and listed. Changes to products, dimensions, penetrant types, or assembly details may affect compliance and performance.
Where can I find the complete UL system details?
Always refer to the official UL listing and current Hilti technical documentation for complete installation requirements, limitations, and approved configurations.
What if my field condition does not match a tested system?
If no listed system matches the field condition, a Technical Evaluation also known as an Engineering Judgement (EJ) may be required. Hilti provides engineering support and EJ services through the Hilti Construction Platform: hcp.hilti.com
Who should use these installation videos?
These videos are intended for contractors, firestop specialty contractors, inspectors, designers, engineers, and anyone involved in firestop system installation or review.
Are these videos a replacement for the UL listing? No. These videos are visual installation aids only. The official UL system listing and applicable project documents govern the installation requirements.
How do I find the right firestop system for my application?
The Hilti Construction Platform Firestop Selector can help identify tested and listed firestop systems based on the penetrant type, assembly construction, fire rating, and other project conditions.
Where can I learn more about Hilti firestop systems?
Explore:
Hilti Construction Platform
hcp.hilti.com
Firestop Selector
firestop.hilti.com
Firestop Resource Center
hilti.com/content/landing-page/local/firestop-resource-center
Hilti Academy training resources for additional firestop documentation, training, and technical support
academy.hilti.com/learn/signin
#hilti #construction
➡️ Follow Hilti North America
instagram.com/hiltinorthamerica
facebook.com/hiltinorthamerica
linkedin.com/company/hilti-usa










