C-AJ-2835 UL Firestop System Installation (US Only) | Large PVC and CPVC Pipe Penetrations @HiltiNorthAmerica
C-AJ-2835 UL Firestop System Installation (US Only) | Large PVC and CPVC Pipe Penetrations  @HiltiNorthAmerica
Uploaded October 2026 | Updated November 2026, 2 days ago
*DISCLAIMER: The firestop system shown in this video is based on a UL-listed design tested for the U.S. market. Use outside the United States may require different approvals, testing, or system designs to meet local building code requirements.*

Watch the step-by-step installation of Hilti UL Firestop System C-AJ-2835, a tested firestop solution for large PVC and CPVC pipe penetrations through rated concrete floors and walls. This system uses FS-ONE MAX Intumescent Sealant, CP 648-E Firestop Wrap Strips, and the CP 675T Z-Frame to help restore the fire-resistance rating of the assembly while providing excellent smoke resistance. The video demonstrates the key installation components and techniques required to achieve compliance with the UL-listed system.

System Highlights:

PVC and CPVC pipes up to 18 in. diameter

Up to 3-hour F-rating

Suitable for concrete floor and wall assemblies

Includes FS-ONE MAX, CP 648-E Wrap Strips, and CP 675T Z-Frame components

For complete installation requirements and system details, always refer to the UL listing and current Hilti technical documentation found on the Hilti Construction Platform – Firestop Selector: firestop.hilti.com

Time Stamps

0:00 - 0:11 C-AJ-2835 Floor Assembly Intro

0:11 - 0:20 Mineral Wool & FS-ONE MAX Sealant Install around Plastic Pipe

0:20 - 0:33 CP 648E Wrap Strip Install around Plastic Pipe

0:33 - 1:10 CP 675T Z-Frame Assembly

1:10 - 1:18 Floor Installation Outro

1:18 - 1:30 Alternative Installation – C-AJ-2835 Wall Assembly Intro

1:30 - 1:41 Second Side Mineral Wool, FS-ONE MAX, & CP648E Install (Refer 0:11)

1:41 - 1:54 Installed System & Outro

Frequently Asked Questions (FAQ)

What is a UL firestop system? 
A UL firestop system is a tested and listed assembly designed to help maintain the fire-resistance rating of a wall or floor after it has been penetrated by pipes, cables, conduits, ducts, or other building services. 

Why is firestopping required? 
Firestopping helps limit the spread of fire, smoke, and hot gases through fire-resistance-rated assemblies, supporting compartmentation and life-safety objectives.
 
What do the UL penetration system numbers mean? 
UL penetration system numbers (such as W-L-3507, W-J-3298, or C-AJ-2835) identify a specific tested assembly that includes the construction type, penetrant, opening size, firestop materials, and installation requirements. 

What do the UL joint system numbers mean? 
UL joint system numbers (such as HW-D-0209, FW-D-1037, or BW-S-0002) identify a specific tested assembly that includes the construction assembly, type of joint, movement capability, joint width, firestop materials, and installation requirements.  

Can I substitute products or change installation details? 
No. Firestop systems should be installed exactly as tested and listed. Changes to products, dimensions, penetrant types, or assembly details may affect compliance and performance. 

Where can I find the complete UL system details? 
Always refer to the official UL listing and current Hilti technical documentation for complete installation requirements, limitations, and approved configurations. 

What if my field condition does not match a tested system? 
If no listed system matches the field condition, a Technical Evaluation also known as an Engineering Judgement (EJ) may be required. Hilti provides engineering support and EJ services through the Hilti Construction Platform: hcp.hilti.com
 
Who should use these installation videos? 
These videos are intended for contractors, firestop specialty contractors, inspectors, designers, engineers, and anyone involved in firestop system installation or review. 
Are these videos a replacement for the UL listing? No. These videos are visual installation aids only. The official UL system listing and applicable project documents govern the installation requirements. 

How do I find the right firestop system for my application? 
The Hilti Construction Platform Firestop Selector can help identify tested and listed firestop systems based on the penetrant type, assembly construction, fire rating, and other project conditions.

Where can I learn more about Hilti firestop systems?

Explore:
Hilti Construction Platform
hcp.hilti.com
Firestop Selector
firestop.hilti.com
Firestop Resource Center
hilti.com/content/landing-page/local/firestop-resource-center
Hilti Academy training resources for additional firestop documentation, training, and technical support
academy.hilti.com/learn/signin

#hilti #construction

➡️ Follow Hilti North America
instagram.com/hiltinorthamerica
facebook.com/hiltinorthamerica
linkedin.com/company/hilti-usa
C-AJ-2835 UL Firestop System Installation (US Only) | Large PVC and CPVC Pipe PenetrationsThe Table Saw That Goes Anywhere | Hilti SCT 60-22Skip waiting on cure times!Product Spotlight: Hilti TE 3000-22 | Heavy-Duty Cordless JackhammerAs building systems change, firestop installation solutions should too.Nuron keeps going ⚡Product Spotlight: Hilti SCT 60-22 Cordless Table Saw | Built for Portable ProductivityW-J-3298 UL Firestop System Installation | Cable Penetrations Through CFS-MSL in Concrete WallsCall them out in the comments! 💭Great question!Traditional welding slowing your project down? 🤔The LadyPlumber
Hilti North America |

C-AJ-2835 UL Firestop System Installation (US Only) | Large PVC and CPVC Pipe Penetrations

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER