Uploaded March 2023 | Updated September 2026, 4 days ago
HAVE you SEEN this whole series?
Link to the PLAYLIST so you can watch ALL of the videos on The Salvage Cave Rebuild:
youtube.com/playlist?list=PLYawuZlnembvRQCUv513QT3d2EyZpDXb6
~
Today's plan is to FINALLY finish the BACK of the Salvage Cave! That starts with installing the steel siding along all of the areas where we have exposed building wrap / wood. This is the top edge, the windows, and the spot where the wall fell over when we were rebuilding the building.
Then the window into the bathroom needs to be completely redone and then reinstalled!
Another HUGE thing for the shop is the install of a Mr Cool HVAC 36k Split @MrcoolComfort unit that will finally give us heat AND AC here at the cave! I am PUMPED to finally have a shop with both!
Once that's installed we will clean the dirty siding we installed to make it look a bit better!
I hope you enjoy the video, and I look forward to hearing from you in the comments!
As ALWAYS, Thanks for Watching!
~
For More info on the Mr Cool 36K Split unit we installed here at the Salvage Cave, please check out the link below for all the details!
mrcool.com/diy-4th-generation
~
0:00 - Going over the plan for today's project
2:41 - Installing the siding along the back of the building
8:55 - Mr Cool has Arrived
9:34 - Repairing and reinstalling the bathroom window
22:32 - Why did we use OLD siding on the back?
24:48 - Installing the MR Cool 36k Split Unit Heater / AC
36:04 - Making a bracket to mount the Outdoor Unit up high on the Block Wall
39:28 - Installing the bracket on the building
42:56 - Moving Machines and stuff
44:40 - Installing the Mr Cool Outdoor unit on the Building
47:32 - The Wheel Loader Forklift is AWESOME!
48:56 - Hooking up the Mr Cool Indoor & Outdoor Units
50:27 - Testing the Mr Cool 36k HVAC system
53:11 - Showing you HEAT and COOL with a Thermal Imaging Camera
1:00:57 - Checking for Leaks & Finishing the Mr Cool Split Unit Install
1:08:13 - Pressure Washing the Dirty OLD Siding we Installed along the back
1:13:00 - Next up on the Salvage Cave Project
~
If you have any suggestions, questions, or comments, please leave them below!
Thanks for stopping by, I truly appreciate your support!
Follow my Instagram for what else I'm up to!
★Instagram★ instagram.com/salvageworkshop
#ShopRescue #TheSalvageCave #SalvageWorkshopOnSite
HAVE you SEEN this whole series?
Link to the PLAYLIST so you can watch ALL of the videos on The Salvage Cave Rebuild:
youtube.com/playlist?list=PLYawuZlnembvRQCUv513QT3d2EyZpDXb6
~
Today's plan is to FINALLY finish the BACK of the Salvage Cave! That starts with installing the steel siding along all of the areas where we have exposed building wrap / wood. This is the top edge, the windows, and the spot where the wall fell over when we were rebuilding the building.
Then the window into the bathroom needs to be completely redone and then reinstalled!
Another HUGE thing for the shop is the install of a Mr Cool HVAC 36k Split @MrcoolComfort unit that will finally give us heat AND AC here at the cave! I am PUMPED to finally have a shop with both!
Once that's installed we will clean the dirty siding we installed to make it look a bit better!
I hope you enjoy the video, and I look forward to hearing from you in the comments!
As ALWAYS, Thanks for Watching!
~
For More info on the Mr Cool 36K Split unit we installed here at the Salvage Cave, please check out the link below for all the details!
mrcool.com/diy-4th-generation
~
0:00 - Going over the plan for today's project
2:41 - Installing the siding along the back of the building
8:55 - Mr Cool has Arrived
9:34 - Repairing and reinstalling the bathroom window
22:32 - Why did we use OLD siding on the back?
24:48 - Installing the MR Cool 36k Split Unit Heater / AC
36:04 - Making a bracket to mount the Outdoor Unit up high on the Block Wall
39:28 - Installing the bracket on the building
42:56 - Moving Machines and stuff
44:40 - Installing the Mr Cool Outdoor unit on the Building
47:32 - The Wheel Loader Forklift is AWESOME!
48:56 - Hooking up the Mr Cool Indoor & Outdoor Units
50:27 - Testing the Mr Cool 36k HVAC system
53:11 - Showing you HEAT and COOL with a Thermal Imaging Camera
1:00:57 - Checking for Leaks & Finishing the Mr Cool Split Unit Install
1:08:13 - Pressure Washing the Dirty OLD Siding we Installed along the back
1:13:00 - Next up on the Salvage Cave Project
~
If you have any suggestions, questions, or comments, please leave them below!
Thanks for stopping by, I truly appreciate your support!
Follow my Instagram for what else I'm up to!
★Instagram★ instagram.com/salvageworkshop
#ShopRescue #TheSalvageCave #SalvageWorkshopOnSite
