Using a CRANE on the New Roof ~ Part 4 ~ Rebuilding of The Salvage Cave @SalvageWorkshop
Using a CRANE on the New Roof ~ Part 4 ~ Rebuilding of The Salvage Cave  @SalvageWorkshop
Uploaded October 2022 | Updated September 2026, 2 days ago
HAVE you SEEN this whole series?

Link to the PLAYLIST so you can watch ALL of the videos on The Salvage Cave Rebuild:
youtube.com/playlist?list=PLYawuZlnembvRQCUv513QT3d2EyZpDXb6

After ALL the prep work and set backs, it's FINALLY time to install the new roof on this old building! A LOT of work and help went into getting the building to this point, and in this video you're going to see the HIGHLIGHTS of what it took to FULLY install the new roof... All the way from setting the trusses, to sheeting the roof, to getting it waterproof, to FINALLY installing new metal roof on the building. I hope you enjoy the video, and I look forward to hearing from you in the comments!

As ALWAYS, Thanks for Watching!

~

This building used to be a car repair shop. The extra space and room has been nice, but before I could use this shop as another workshop for the channel, a LOT of work needed to be done, including a new roof, better lighting, and much more! I have restored a variety of old tools and machines on the channel; now, it's time to restore an old shop. I spent the winter on this construction project, and I hope you'll enjoy following along. Join me on another adventure as I take an old, beat up shop and transform it into The Salvage Cave.


~

0:00 - Introduction/Previously on Salvage Workshop...
1:17 - Let the roof tear off begin!
1:50 - Setting the trusses with the crane truck
5:45 - New garage doors
10:00 - Putting the plywood on
13:43 - Sheeting the back of the roof
15:48 - Installing the synthetic roofing material
17:43 - Boarding up the gable ends on each side of the building
23:50 - Demolishing the center of the old roof
28:24 - Putting Tyvek on the front of the building
31:42 - Installing the metal on the roof
37:49 - It snowed!
39:39 - Finishing the roof
43:06 - Stay tuned for Part 5 of The Cave Rebuild

If you have any suggestions, questions, or comments, please leave them below!

Thanks for stopping by, I truly appreciate your support!

Follow my Instagram for what else I'm up to!

★Instagram★ instagram.com/salvageworkshop

#ShopRestoration #TheSalvageCave #SalvageWorkshopOnSite
Using a CRANE on the New Roof ~ Part 4 ~ Rebuilding of The Salvage CaveEver Heard of a SWENCH? ~ RESTORATION ~ Massive NUT Smacking Ability, in the Palm of Your Hand!This Machine Shop is a TRUE Step Back in TIME! ~ RESCUING OLD IRON ~ Episode 3 P2 ~ TOOLING Galore!!Old Excavator DROVE out of its GRAVE after 25+ Years! ~ 1970s Insley H800 Track-Hoe ~ Part 2Fixing My Trusty Old Pickup Truck ~ It Sprung a Leak & a Few OTHER Things!TRYING to FIX the MAGIC Fuel Box... This one is COMPLICATED! ~ 1995 Gehl 5625sx Skid Loader P3OLD 2 Stage Air Compressor ~ FREE Compressor Decision Time! ~ RESTORATION Part 1Can we SAVE the WELL at the Farm with a Crane & HAND Tools? ~ Putting my Auger Crane Truck to WORK!Getting Alester Ready to Build a Pond Part 1... Major Problems with the Old Dozer! - Cat D3 Part 9FINALLY Reassembling Alester & Giving the Dozer a Full SERVICE ~ Cat D3 LGP - Part 8Cleaning 40 years of Dirt from my new shop CouchFINALLY Getting 3 Phase POWER! ~ Preparing to Install a Rotary Phase Converter ~ Part 1
Salvage Workshop |

Using a CRANE on the New Roof ~ Part 4 ~ Rebuilding of "The Salvage Cave"

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER