Walking the Cup  - Scratch Start TIG @weldingtipsandtricks
Walking the Cup  - Scratch Start TIG  @weldingtipsandtricks
Uploaded January 2025 | Updated November 2026, 3 hours ago
Visit my store at weldmongerstore.com for TIG cup Kits, TIG Fingers, Gloves, Tungsten, Filler metal, and other quality welding tools. New products being added weekly

Walking the cup is mostly for pipe and socket welds but if you dont have access to pipe coupons the next best thing is plate.
I used 3/8" plate with some tracks made with a grinder to keep me straight.
160 amps at first but bumped amperage to 170 and that seemed about right.
I used a primeweld mts200 mig, tig, stick welder and a 17v torch with a valve.
Walking the Cup  - Scratch Start TIGFreehand or Walk the CupGetting by with 2% Thoriated on AluminumTravel Speed Face OffAluminum TIG - Tips, Settings, and More🔥Fire Pit TIG Project No Foot Pedal! - 2T vs 4T ExplainedPrimeWeld TIG325x Aluminum TIG WeldBack and Forth - Aluminum and Carbon SteelArc Length tips @ 250 Hertz120 hz All Around Good SettingPulse plus Chill Bars - good resultsNever done Stainless Pipe? Try this.
weldingtipsandtricks |

Walking the Cup - Scratch Start TIG

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER