Uploaded August 2024 | Updated November 2026, 9 hours ago
Visit my store at weldmongerstore.com for TIG cup Kits, TIG Fingers, Gloves, Tungsten, Filler metal, and other quality welding tools. New products being added weekly.
In this video I used a primeweld 325x to make a fillet weld on 1/2" to 1/4" thick aluminum.
I set the AC frequency to 175hz to give the arc more focus so that I could hit the root.
AC balance was set to 35% cleaning because this aluminum piece was kind of dirty from sitting around the shop so long.
I used a #7 clear cup for better arc shots along with 1/8" 2% lanthanated tungsten
Visit my store at weldmongerstore.com for TIG cup Kits, TIG Fingers, Gloves, Tungsten, Filler metal, and other quality welding tools. New products being added weekly.
In this video I used a primeweld 325x to make a fillet weld on 1/2" to 1/4" thick aluminum.
I set the AC frequency to 175hz to give the arc more focus so that I could hit the root.
AC balance was set to 35% cleaning because this aluminum piece was kind of dirty from sitting around the shop so long.
I used a #7 clear cup for better arc shots along with 1/8" 2% lanthanated tungsten










