Aluminum TIG - Tips, Settings, and More @weldingtipsandtricks
Aluminum TIG - Tips, Settings, and More  @weldingtipsandtricks
Uploaded March 2026 | Updated November 2026, 12 hours ago
Visit my store at weldmongerstore.com for TIG cup Kits, TIG Fingers, Gloves, Tungsten, Filler metal, and other quality welding tools. New products being added weekly.

USA & International:
weldmonger.com

Australia! Just Launched
Shop locally:
https://weldmonger.com.au

New products being added weekly.

TIG welding aluminum has its challenges, and in this video I demonstrate how to handle **outside corner joints** without melting the edge away.
Outside corners on aluminum can get out of hand fast if your heat control isn’t dialed in, so I also demonstrate you how torch angle, filler timing, and arc length all work together to keep the edge crisp. We’ll also talk about **AC frequency settings when welding near an edge**, and how tightening up the arc cone with higher frequency can help you keep the heat focused exactly where you want it instead of rolling over the edge.

One of the biggest skills in aluminum TIG is **learning to read the puddle for full penetration on butt welds. Aluminum can be deceiving so you have to watch the shape, fluidity, and sink behavior carefully. I explain what to look for in the puddle when you’re getting full penetration.
We’ll also cover **tack welding thin aluminum** , including amperage control and quick filler additions that prevent cracking or blowing holes in lightweight material.

Finally, we get into **pulse settings and how they can improve your timing**. Pulse TIG isn’t magic—but when used correctly, it can train your rhythm and help you coordinate filler dabs with peak amperage.
Aluminum TIG - Tips, Settings, and More🔥Fire Pit TIG Project No Foot Pedal! - 2T vs 4T ExplainedPrimeWeld TIG325x Aluminum TIG WeldBack and Forth - Aluminum and Carbon SteelArc Length tips @ 250 Hertz120 hz All Around Good SettingPulse plus Chill Bars - good resultsNever done Stainless Pipe? Try this.Walk the Cup Fillet 3F T JointReason 4 for going to FABTECH - MeetupsTake Multiple Welding Courses for $1 at WelderSkillsStarting Cold to Punch it in
weldingtipsandtricks |

Aluminum TIG - Tips, Settings, and More

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER