Vez3D | VzBoT 700mm/s@30K - ODrive, Magnum+ #speedprinting @Vez3D | Uploaded June 2021 | Updated October 2024, 22 hours ago.
0.15mm Layer heigh
0.4 Nozzle with 0.45 Layer Width
700mm/s solid fills and 800mm/s walls.. except first layer at 150
30K accel
12 SCV
-Printer: VzBoT (Custom designed/built) 330x330x400mm
-Klipper
-Odrive V3 system
-270 KV motors
-Pressure Advance 0.003
-Input_shaper tuned with Accelerometer
-MGN12 rails Y MGN9 rail X
-Magnum+
-PT100
-Hextrudort from HevORT direct drive. miragec79.github.io/HextrudORT
-Custom EVA X carriage modded for Magnum+ https://main.eva-3d.page/
-0.3mm retract
-260C ABS
-700mm/s on infill 800mm/s on walls
-PEI coted flex plate
-10mm Z smooth rods
-1 single Z motor, 2:1 gear ratio
-0.4mm nozzle
-0.15 layer height
0.15mm Layer heigh
0.4 Nozzle with 0.45 Layer Width
700mm/s solid fills and 800mm/s walls.. except first layer at 150
30K accel
12 SCV
-Printer: VzBoT (Custom designed/built) 330x330x400mm
-Klipper
-Odrive V3 system
-270 KV motors
-Pressure Advance 0.003
-Input_shaper tuned with Accelerometer
-MGN12 rails Y MGN9 rail X
-Magnum+
-PT100
-Hextrudort from HevORT direct drive. miragec79.github.io/HextrudORT
-Custom EVA X carriage modded for Magnum+ https://main.eva-3d.page/
-0.3mm retract
-260C ABS
-700mm/s on infill 800mm/s on walls
-PEI coted flex plate
-10mm Z smooth rods
-1 single Z motor, 2:1 gear ratio
-0.4mm nozzle
-0.15 layer height