Uploaded November 2020 | Updated November 2026, 15 hours ago
I build a 5-drawer vanity table with only hand tools!
Well, here we are! Drawer making time. Oh, and the drawer rails and kicks, too.
In the third video of this series, I build the drawers and the internal support structure.
With the 4 drawers on the right, I had a bid of an issue where I couldn't just glue in normal drawer slides/rails and kicks, because they would interfere with other drawers, since that middle divider has no clearance (for example, the sides are set back about 1/2" because of the legs.
So, I ran a groove and set a floating panel in that. Because things are so tight in there, I have removable rails on the other side, which allowed me to assemble the drawer rails/kicks after the main carcass glue up.
This project (particularly in videos 2 and 3, this one) really highlighted my inexperience in designing more complicated pieces of furniture. But hey, I've learned from it, I hope.
The next video will show me doing the moulding profile on the underneath of the top, and then finishing the project.
Thanks for watching!
Watch me turn the legs on a pole lathe: youtu.be/IWviIFoip3g
Build the pole lathe: youtu.be/iubYnvf-jhU
Building a writing desk: youtu.be/3-AmF-116YI
---
If you enjoyed, please consider subscribing, liking, commenting, etc. And please check out my other social profiles.
Instagram: instagram.com/thehandtoolery
Facebook: facebook.com/TheHandToolery
My Etsy Shop: etsy.com/shop/TheHandToolery
Thanks!
Andrew
I build a 5-drawer vanity table with only hand tools!
Well, here we are! Drawer making time. Oh, and the drawer rails and kicks, too.
In the third video of this series, I build the drawers and the internal support structure.
With the 4 drawers on the right, I had a bid of an issue where I couldn't just glue in normal drawer slides/rails and kicks, because they would interfere with other drawers, since that middle divider has no clearance (for example, the sides are set back about 1/2" because of the legs.
So, I ran a groove and set a floating panel in that. Because things are so tight in there, I have removable rails on the other side, which allowed me to assemble the drawer rails/kicks after the main carcass glue up.
This project (particularly in videos 2 and 3, this one) really highlighted my inexperience in designing more complicated pieces of furniture. But hey, I've learned from it, I hope.
The next video will show me doing the moulding profile on the underneath of the top, and then finishing the project.
Thanks for watching!
Watch me turn the legs on a pole lathe: youtu.be/IWviIFoip3g
Build the pole lathe: youtu.be/iubYnvf-jhU
Building a writing desk: youtu.be/3-AmF-116YI
---
If you enjoyed, please consider subscribing, liking, commenting, etc. And please check out my other social profiles.
Instagram: instagram.com/thehandtoolery
Facebook: facebook.com/TheHandToolery
My Etsy Shop: etsy.com/shop/TheHandToolery
Thanks!
Andrew










