Using the Tech2 as a programming pass thru device with SPS2 or TLC @ThePracticalMechanic
Using the Tech2 as a programming pass thru device with SPS2 or TLC  @ThePracticalMechanic
Uploaded January 2024 | Updated November 2026, 3 hours ago
GM now allows us to us our tech2 scan tools for programming with SPS2. This is great for the older class 2 communication vehicles. Many newer programming devices are too fast or deliver the programming at the wrong time so it is best to use an older J2534 device or better yet the TECH2. You will need a functioning TECH2 scan tool ( I have not tried this with tech2 clone), You will need the DB9 serial to RJ45 adaptor, rj45 cable, a usb to serial Skyspan adaptor if your laptop doesn't have the DB9 serial port.

Some links below include affiliate links that help support the channel.
Need service information for your next project? Help support this channel by trying MitchellDIY.
https://eautorepair.adtrk.biz/?a=10863&c=10032&p=r&s1=
USB to SERIAL adaptor - amzn.to/429KvKy
tech2 to pc cable with adaptor - amzn.to/429KvKy
TOPDON programming power supply - amzn.to/3Ua2pLe
Using the Tech2 as a programming pass thru device with SPS2 or TLCToyota pops out of gear - check this 1st2008 Toyota Highlander Misfire Live Diag - tell me what to check2017 Toyota Yaris iA stalls and no start diag1960 Chevy Biscayne LS Swap Ep 34 - Filling coolant and transmissionSubaru VVT Learned Values Reset With Launch Torque Link | ECM SavedLoad testing ford COP coils ( High Load RFI Test)Jeep Commander 5.7 throttle control issue followup from live streamWeekly waveform 20 - How to scope the throttle body motor controlWeekly Waveform 19 - How to scope a TPS signal plus how does a TPS sensor even work?2005 Subaru Forester oil cooler O-ring2007 Ford 6.0 liter PowerStroke cranks no start diagnoisis and repair
ThePracticalMechanic |

Using the Tech2 as a programming pass thru device with SPS2 or TLC

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER