2017 Toyota Yaris iA stalls and no start diag @ThePracticalMechanic
2017 Toyota Yaris iA stalls and no start diag  @ThePracticalMechanic
Uploaded November 2019 | Updated November 2026, 5 hours ago
Customer complaint: No start at time and occasionally stalls.
Previous repair work: Don't know but we do know the Ford dealership sold the car and couldn't find the issue when the customer brought it back to them.

Spoilers below


Codes: u0100, u0115, u0121, u0131, u0151, B10E7, C1031
Key codes to focus on: B10E7 - Ignition 1 Relay (Failure Type 16)
Test to perform. Verify we have full battery voltage getting into and out of the IG1 relay and the IG1 fuses.

Test results: Main 200A fuse was good, power to the IG1 fuse was bad, tested at the relay input and had good power, tested at the relay output and power was bad. We had 12V going in and 1-3V coming out. If the relay was manipulated it would sometimes work and have good power output.

Cause: Failed IG relay
Correction: Replace the IG relay, clear memories and retest system.
2017 Toyota Yaris iA stalls and no start diag1960 Chevy Biscayne LS Swap Ep 34 - Filling coolant and transmissionSubaru VVT Learned Values Reset With Launch Torque Link | ECM SavedLoad testing ford COP coils ( High Load RFI Test)Jeep Commander 5.7 throttle control issue followup from live streamWeekly waveform 20 - How to scope the throttle body motor controlWeekly Waveform 19 - How to scope a TPS signal plus how does a TPS sensor even work?2005 Subaru Forester oil cooler O-ring2007 Ford 6.0 liter PowerStroke cranks no start diagnoisis and repairSimplified diagnostic on a Subaru Forester horn. Letโ€™s split the circuit for a faster diag.2008 Ford 6.4 Injector Balance before and after cleaningWeekly waveform 4 recap and review.
ThePracticalMechanic |

2017 Toyota Yaris iA stalls and no start diag

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER