Load testing ford COP coils ( High Load RFI Test) @ThePracticalMechanic
Load testing ford COP coils ( High Load RFI Test)  @ThePracticalMechanic
Uploaded July 2019 | Updated November 2026, 3 hours ago
Today we learn how to perform a high load test on ford and mazda ignition coils. this test cam be performed with or without the special tools from snapon. I use the COP 1 ignition probe and the PicoScope COP wand for testing.

please use cation when performing this test to protect yourself and your scope do not let the open coil boot come within 3 inches of your scope, scanner, laptop, wires or You.
Load testing ford COP coils ( High Load RFI Test)Jeep Commander 5.7 throttle control issue followup from live streamWeekly waveform 20 - How to scope the throttle body motor controlWeekly Waveform 19 - How to scope a TPS signal plus how does a TPS sensor even work?2005 Subaru Forester oil cooler O-ring2007 Ford 6.0 liter PowerStroke cranks no start diagnoisis and repairSimplified diagnostic on a Subaru Forester horn. Let’s split the circuit for a faster diag.2008 Ford 6.4 Injector Balance before and after cleaningWeekly waveform 4 recap and review.Subaru VVT Learned Values Reset With Autel | ECM Saved!Weekly waveform 15 - Cooling system pulse sensor test. Does it have a bad head gasket?Snapon Triton D10 features and comparison
ThePracticalMechanic |

Load testing ford COP coils ( High Load RFI Test)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER