Uploaded October 2025 | Updated November 2026, 3 days ago
[Updated Schematic] AC-DC Switching Power Supply
======================================
Altium Develop (Legal License): altium.com/yt/MyVanitar
======================================
Schematic & PCB: 365.altium.com/files/5E02104B-7D68-4C35-836F-AC9FC0618A65
======================================
Other Videos: bit.ly/2N9OlPa
======================================
@AtiumOfficial
#altiumstories
In this video, I’ll show you my 85V–240VAC to 5VDC 2A Flyback Switching Power Supply, designed and built around the Viper22A controller IC.
The circuit provides a stable 5V / 2A DC output from a wide AC input range (85V to 240VAC), making it suitable for universal power applications.
[Updated Schematic] AC-DC Switching Power Supply
======================================
Altium Develop (Legal License): altium.com/yt/MyVanitar
======================================
Schematic & PCB: 365.altium.com/files/5E02104B-7D68-4C35-836F-AC9FC0618A65
======================================
Other Videos: bit.ly/2N9OlPa
======================================
@AtiumOfficial
#altiumstories
In this video, I’ll show you my 85V–240VAC to 5VDC 2A Flyback Switching Power Supply, designed and built around the Viper22A controller IC.
The circuit provides a stable 5V / 2A DC output from a wide AC input range (85V to 240VAC), making it suitable for universal power applications.

![0-30V, 0-7A Adjustable Switching Power Supply [CC-CV, Buck Converter]
0-30V, 0-7A Adjustable/Variable Switching Power Supply Circuit/Schematic, CC-CV, DC to DC Buck Converter using XL4016
Altium Designer + License (Free): https://www.altium.com/yt/myvanitar
Article: https://www.pcbway.com/blog/technology/0_30V 0_7A_Adjustable_Switching_Power_Supply.html
https://www.pcbway.com/project/shareproject/0_30V 0_7A_Adjustable_Switching_Power_Supply.html
Check other videos: http://bit.ly/2N9OlPa
DC to DC buck converters is a famous topology in the electronic and a widely used circuit in electronic devices. A buck converter steps down the input voltage while it increases the output current. In this article/video, I have discussed a DC to DC buck converter that can be used effectively as a switching power supply. The output voltage and current are adjustable: 1.25V to 30V and 10mA to 6A (continuous). The power supply supports the constant voltage (CV) and constant current (CC) features. Two LEDs demonstrate the CV and CC status. The circuit is compact and both sides of the PCB have been used to mount the components.
To design the schematic and PCB, I used Altium Designer 21, also the SamacSys component libraries (Altium plugin) to install the missing schematic symbols/PCB footprints. To get high-quality fabricated PCB boards, I sent the Gerbers to PCBWay.
To test the circuit, I used the power analysis feature of the Siglent SDS2102X Plus oscilloscope (or SDS1104X-E), Siglent SDL1020X-E DC Load, and Siglent SDM3045X multimeter.
The CC and CV feature of this device, allows us to use it in many applications, such as charging lithium-ion or lead-acid batteries. power supply calculator. gm power supply.
Isn’t cool, so let’s get started!
Music by Atch
SoundCloud: https://bit.ly/AtchSoundCloud
Spotify: https://bit.ly/AtchSpotify
Instagram: https://instagram.com/atchmusic 0-30V, 0-7A Adjustable Switching Power Supply [CC-CV, Buck Converter]](https://i.ytimg.com/vi/B39GRCRwXqk/mqdefault.jpg)






![LM317 Current Boosting Circuits [2N3055, MJ2955]
LM317 Current Boost Circuits using 2N3055 and MJ2955
Altium Designer + License (Free): https://www.altium.com/yt/myvanitar
Article Source (Schematic, Details): https://www.pcbway.com/blog/technology/LM317_Current_Boosting_Secrets.html
Check other videos: http://bit.ly/2N9OlPa
#LM317
LM317 is one of the most popular adjustable regulator chips. The output voltage of the regulator can be adjusted from 1.25V to 35V. However, the chip can deliver currents up to 1.5A which is not enough for some power applications. In this article, I will discuss two methods of LM317 current boosting, using power PNP and NPN pass transistors.
According to the LM317 datasheet: “The LM317 [1, 2] device is an adjustable three-terminal positive-voltage regulator capable of supplying more than 1.5 A over an output-voltage range of 1.25 V to 37 V. It requires only two external resistors to set the output voltage. The device features a typical line regulation of 0.01% and a typical load regulation of 0.1%. It includes current limiting, thermal overload protection, and safe operating area protection. Overload protection remains functional even if the ADJUST terminal is disconnected.”
This information proves to us that this cheap 3-terminal device is suitable for many applications but it comes with a drawback for power applications and that is the limitation of the regulator’s output current handling (1.5A in the best conditions). This problem can be solved using a pass power transistor.
Current Boosting Using a PNP Power Transistor (MJ2955)
Figure-1 shows the schematic diagram of the circuit. This is an adjustable high current regulator circuit that the output voltage can be adjusted using a 5K potentiometer.
The 10R resistor defines the Turn-On time of the pass-transistor and by the way, it defines how much current should passe through the LM317 and MJ2955 [3, 4]. Based on this parameter, the power rate of the resistor must be calculated. 1N4007 is a protective diode and 270R resistor provides the necessary ADJ pin’s current. As mentioned earlier, the 5K potentiometer defines the output voltage. 1000uF, 10uF, and 100nF capacitors have used to reduce noises. Don’t forget to install the transistor on a big heatsink.
[A-2] Current Boosting Using an NPN Power Transistor (2N3055)
Figure-2 shows the schematic diagram of the circuit. The 10K resistor at the output draws a small amount of current to avoid the floating output and it helps to stabilize the output voltage. Here 2N3055 [5, 6] plays the role of pass-transistor also. LM317 Current Boosting Circuits [2N3055, MJ2955]](https://i.ytimg.com/vi/FItAwcsj0OI/mqdefault.jpg)

