Unboxing XIAO RA4M1 with Renesas Arm MCU, 19 GPIOs, RGB LED, CAN BUS and USB 2.0 #shorts #arduinoide @LeonAnavi

Uploaded January 2025 | Updated September 2026, 2 weeks ago

Unboxing Seeed Studio XIAO RA4M1, the smallest dev board featuring this 32-bit Renesas Arm microcontroller with RGB LED, CAN BUS, and USB 2.0 support. It is compatible with Arduino IDE and Arduino sketches. Get started and learn more at: wiki.seeedstudio.com/getting_started_xiao_ra4m1

Unboxing XIAO RA4M1 with Renesas Arm MCU, 19 GPIOs, RGB LED, CAN BUS and USB 2.0 #shorts #arduinoide

Unboxing Meshtastic Dev Kit with XIAO nRF52840 and Wio-SX1262 LoRa #shorts #meshtastic

Multi-Functional Cabinet Door Installation Tool for Precise Dowel Drilling. Ideal for DIY Carpenters

Lenovo ThinkPad T490 Laptop Upgrade with 16GB RAM and 512GB Micron M.2 2280 NVMe SSD

Low Power Linux Machine: Fujitsu Futro S920 Thin Client Tested

WB3S Wi-Fi Module with Beken BK7231 #wifi #mcu #bekent #tuya

Is a Cheap Wireless Presenter Worth It? DSIT0011 Review and Test

Secure Shell (SSH) on Raspeberry Pi 5 with the Yocto Project (demo) #raspberrypi #yocto #ssh

ThinkPad T480s RAM Upgrade Gone Wrong: Epic Fail!

$The Yocto Project on Raspberry Pi 5 Episode 7: Create a New Layer, a New Recipe (.bb) and .bbappend This is episode 7 of our series on the Yocto Project and OpenEmbedded for Raspberry Pi 5, where we will discuss how to create a new layer, how to create a new recipe and how to extend an existing recipe using .bbappend file. All examples are based on the Yocto LTS release Scarthgap. * Initialize the build environment: source oe-init-build-env * Create a new layer: bitbake-layers create-layer ../meta-leon * Add the new layer to conf/bblayers.conf: bitbake-layers add-layer ../meta-leon * Open another terminal and enter the layer created on the previous step: cd meta-leon * Create a directory for the Hello, World recipe: mkdir -p recipes-apps/hello/ * Create recipe recipes-apps/hello/hello_git.bb with the following content: DESCRIPTION = Hello World HOMEPAGE = https://github.com/leon-anavi/hello-world SECTION = console/utils LICENSE = MIT LIC_FILES_CHKSUM = file://LICENSE;md5=f388cad0df1af35e3626518d587c0cb6 SRC_URI = git://github.com/leon-anavi/hello-world.git;branch=master;protocol=https SRCREV = f66f58e7bcdcc834568d8c7c6fc51e30765befad S = ${WORKDIR}/git inherit autotools * Create a directory in the layer to extend core-image-base: mkdir -p recipes-core/images/ * Create file recipes-core/images/core-image-base.bbappend and add in it the following line to install the hello recipe from layer meta-leon to core-image-base: IMAGE_INSTALL:append = hello * Go back to the terminal where the build environment has been initialized and build the new image: bitbake core-image-base * Flash core-image-base-raspberrypi5.rootfs.wic.bz2 to a microSD card * Boot Raspberry Pi 5 from the microSD card and execute hello to verify that the Hello, World application has been successfully built and included in the image. 🔗 Related Videos Episode 1: The Yocto Project on Raspberry Pi 5: Building an Embedded GNU Linux Distribution https://youtu.be/fY7u6PiV8qA?si DgvkJ_yTsiX05vx Episode 2: SSH for Remote Network Access https://youtu.be/ltckiBV9FXg?si=DJwsKLDhHkDIqCIn Episode 3: Running Docker Containers https://youtu.be/kQnOidK_U3M?si=5KiS1FK87OwfdQ0m Episode 4: U-Boot Bootloader https://youtu.be/9tohomiv1Ug?si=QydN1yPRJzY6zEfz Episode 5: Modifying U-Boot Environment in Linux with fw_setenv https://youtu.be/SB5NvIF1IEU?si=gW02HUr-0cfdyQLL Episode 6: Runtime Package Management with apt and deb Packages https://youtu.be/6i5UtF7fiaA?si=3n1hRSEaSfe5a92N 📚 Useful Links https://www.yoctoproject.org/ https://docs.yoctoproject.org/ https://www.openembedded.org/wiki/Main_Page$

Marshall Emberton Counterfeit Bluetooth Speaker Disassembly and Repair