Tormach Inc. | Tormach 24R - Automatic Tool Changer Installation Video @tormachinc | Uploaded July 2022 | Updated October 2024, 1 day ago.
The Tormach 24R Automatic Tool Changer allows owners to add an ISO20, 24,000 RPM, ten tool automatic tool changer to their router. This process can be complex, so we made sure to produce this series of automatic tool changer installation videos to help guide you along. This video is not a replacement for the most current document. You must download the most recent version here: tormach.com//docs
Owners within the first 96 units of the Tormach 24R may need to install other components before performing the 24R ATC. Links to these Serial Number breaks and their corresponding videos are below.
24R ATC 24R New Power Supply Installation Video - Only for Customers with the SN of RA10,001 to RA10084 (This part will be sent to these customers): youtu.be/xghzutidhwY
24R Z-Axis Brake Video - Only for Customers with the SN of RA10,001 to RA10,096: youtu.be/hRUY4eNSCP0
Purchase the 24R ATC Upgrade Here! hubs.ly/Q01h5_j00
Chapters:
Introduction: 0:00
Serial Number Breaks: 0:20
Begin the Installation: 1:04
Update PathPilot: 1:27
Prepare the Machine: 2:02
Remove the Existing Spindle: 2:33
Install the New Spindle: 3:36
Routing the Wires: 5:11
Rewire the ATC Cable: 5:52
Install the Solenoid Tray: 8:37
Connect the FRL to the Rear of the 24R: 9:56
Connect the Airlines to the Spindle: 11:04
Install the Power Drawbar Button: 11:57
Install the Lift Dust Shoe: 13:05
Install the ATC Communication Board: 14:03
Install the ATC Rack: 15:14
Inspect the ATC Board: 16:53
Adjust the ATC Air Pressure Settings: 17:44
Verify the Power Drawbar Function: 20:44
Verify the Spindle Direction: 21:29
Align the ATC Rack: 22:47
Break in the Spindle: 24:31
Load a Tool into the Spindle: 25:17
Remove a Tool from the Spindle: 25:42
Store the Current Tool into a Pocket: 26:06
Automatically Select a Pocket: 26:28
Select a Specific Pocket: 26:48
Fetch a Tool from a Pocket: 27:11
Remove a Tool from the ATC: 27:30
Measure a Tool: 28:01
Touch off the Entire ATC Rack: 28:18
PathPilot Latest Release: tormach.com/support/software/pathpilot/pathpilot-updates-and-notes
Be sure to subscribe for updates on everything Tormach: goo.gl/sWeCs7
If you want technical support, please follow these instructions to open a Support Ticket: tormach.com/how-to-submit-a-support-ticket?utm_source=youtube&utm_medium=social&utm_campaign=ytlinks
Join the Tormach Community Forums here: forums.tormach.com/?utm_source=youtube&utm_medium=social&utm_campaign=ytlinks
There are several ways to contact Tormach Technical Support.
Tormach Technical Support Page: tormach.com/support?utm_source=youtube&utm_medium=social&utm_campaign=ytlinks
Tormach Technical Support Contact: https://tormach.atlassian.net/service...
About Us: At Tormach, we're dedicated to providing exceptionally engineered products, technical support, and customer service at the lowest possible cost. Our focus is to help you realize your CNC goals through tools and resources that transform your concepts into real products. Connect with us:
Visit our website: tormach.com/?utm_source=youtube&utm_medium=social&utm_campaign=ytlinks
The Tormach 24R Automatic Tool Changer allows owners to add an ISO20, 24,000 RPM, ten tool automatic tool changer to their router. This process can be complex, so we made sure to produce this series of automatic tool changer installation videos to help guide you along. This video is not a replacement for the most current document. You must download the most recent version here: tormach.com//docs
Owners within the first 96 units of the Tormach 24R may need to install other components before performing the 24R ATC. Links to these Serial Number breaks and their corresponding videos are below.
24R ATC 24R New Power Supply Installation Video - Only for Customers with the SN of RA10,001 to RA10084 (This part will be sent to these customers): youtu.be/xghzutidhwY
24R Z-Axis Brake Video - Only for Customers with the SN of RA10,001 to RA10,096: youtu.be/hRUY4eNSCP0
Purchase the 24R ATC Upgrade Here! hubs.ly/Q01h5_j00
Chapters:
Introduction: 0:00
Serial Number Breaks: 0:20
Begin the Installation: 1:04
Update PathPilot: 1:27
Prepare the Machine: 2:02
Remove the Existing Spindle: 2:33
Install the New Spindle: 3:36
Routing the Wires: 5:11
Rewire the ATC Cable: 5:52
Install the Solenoid Tray: 8:37
Connect the FRL to the Rear of the 24R: 9:56
Connect the Airlines to the Spindle: 11:04
Install the Power Drawbar Button: 11:57
Install the Lift Dust Shoe: 13:05
Install the ATC Communication Board: 14:03
Install the ATC Rack: 15:14
Inspect the ATC Board: 16:53
Adjust the ATC Air Pressure Settings: 17:44
Verify the Power Drawbar Function: 20:44
Verify the Spindle Direction: 21:29
Align the ATC Rack: 22:47
Break in the Spindle: 24:31
Load a Tool into the Spindle: 25:17
Remove a Tool from the Spindle: 25:42
Store the Current Tool into a Pocket: 26:06
Automatically Select a Pocket: 26:28
Select a Specific Pocket: 26:48
Fetch a Tool from a Pocket: 27:11
Remove a Tool from the ATC: 27:30
Measure a Tool: 28:01
Touch off the Entire ATC Rack: 28:18
PathPilot Latest Release: tormach.com/support/software/pathpilot/pathpilot-updates-and-notes
Be sure to subscribe for updates on everything Tormach: goo.gl/sWeCs7
If you want technical support, please follow these instructions to open a Support Ticket: tormach.com/how-to-submit-a-support-ticket?utm_source=youtube&utm_medium=social&utm_campaign=ytlinks
Join the Tormach Community Forums here: forums.tormach.com/?utm_source=youtube&utm_medium=social&utm_campaign=ytlinks
There are several ways to contact Tormach Technical Support.
Tormach Technical Support Page: tormach.com/support?utm_source=youtube&utm_medium=social&utm_campaign=ytlinks
Tormach Technical Support Contact: https://tormach.atlassian.net/service...
About Us: At Tormach, we're dedicated to providing exceptionally engineered products, technical support, and customer service at the lowest possible cost. Our focus is to help you realize your CNC goals through tools and resources that transform your concepts into real products. Connect with us:
Visit our website: tormach.com/?utm_source=youtube&utm_medium=social&utm_campaign=ytlinks