Tormach Inc. | Tormach 1100M+ Servo Upgrade Installation Video @tormachinc | Uploaded April 2019 | Updated October 2024, 1 day ago.
Servos are now available! tormach.com/m-plus-servo-upgrade-kit
Chapter Markers
Introduction and initial Setup - 0:00
Preparing the Machine - 1:08
Remove the Stepper Motor Drivers - 3:02
Servo Motors Installation - 7:13
Making the Electrical Connections - 12:35
Verify the Installation - 13:58
Adhering the M+ Decals - 14:32
This video covers the installation of servo motors onto a Tormach 1100M machine to upgrade it to M+ or MX (when available). The procedure is similar for the 770M+ and 770MX (when available) upgrades, so please refer to the manual to note the differences.
This video doesn’t replace the Tormach Technical Document (TD10580) that is available on our website: tormach.com/support/wpdmpro/td10580-1100m-plust-upgrade-kit
Please read all the tool requirements, warnings, and cautions before you begin. If needed, please contact Tormach Technical Support at support@tormach.com for additional assistance.
Interested in a Tormach machine? Schedule a call with one of our team members at hubs.ly/Q029gf-H0 and they will be happy to answer any questions you have.
Be sure to subscribe for updates on everything Tormach: goo.gl/sWeCs7
Join the Tormach Forums here: hubs.ly/Q029ggRV0
There are several ways to contact Tormach Technical Support.
If you want technical support, please follow these instructions to open a support ticket: hubs.ly/Q029ghcD0
Tormach Technical Support page: hubs.ly/Q029ghwW0
Tormach Technical Support contact: tormach.atlassian.net/servicedesk/customer/portals
About Us: At Tormach, we're dedicated to providing exceptionally engineered products, technical support, and customer service at the lowest possible cost. Our focus is to help you realize your CNC goals through tools and resources that transform your concepts into real products. Connect with us:
Visit our website: hubs.ly/Q029gj8M0
Facebook: facebook.com/tormach
Instagram: instagram.com/tormach
Twitter: twitter.com/tormach
LinkedIn: linkedin.com/company/tormach
Servos are now available! tormach.com/m-plus-servo-upgrade-kit
Chapter Markers
Introduction and initial Setup - 0:00
Preparing the Machine - 1:08
Remove the Stepper Motor Drivers - 3:02
Servo Motors Installation - 7:13
Making the Electrical Connections - 12:35
Verify the Installation - 13:58
Adhering the M+ Decals - 14:32
This video covers the installation of servo motors onto a Tormach 1100M machine to upgrade it to M+ or MX (when available). The procedure is similar for the 770M+ and 770MX (when available) upgrades, so please refer to the manual to note the differences.
This video doesn’t replace the Tormach Technical Document (TD10580) that is available on our website: tormach.com/support/wpdmpro/td10580-1100m-plust-upgrade-kit
Please read all the tool requirements, warnings, and cautions before you begin. If needed, please contact Tormach Technical Support at support@tormach.com for additional assistance.
Interested in a Tormach machine? Schedule a call with one of our team members at hubs.ly/Q029gf-H0 and they will be happy to answer any questions you have.
Be sure to subscribe for updates on everything Tormach: goo.gl/sWeCs7
Join the Tormach Forums here: hubs.ly/Q029ggRV0
There are several ways to contact Tormach Technical Support.
If you want technical support, please follow these instructions to open a support ticket: hubs.ly/Q029ghcD0
Tormach Technical Support page: hubs.ly/Q029ghwW0
Tormach Technical Support contact: tormach.atlassian.net/servicedesk/customer/portals
About Us: At Tormach, we're dedicated to providing exceptionally engineered products, technical support, and customer service at the lowest possible cost. Our focus is to help you realize your CNC goals through tools and resources that transform your concepts into real products. Connect with us:
Visit our website: hubs.ly/Q029gj8M0
Facebook: facebook.com/tormach
Instagram: instagram.com/tormach
Twitter: twitter.com/tormach
LinkedIn: linkedin.com/company/tormach
