The Slate @MrAudioSoundImages
The Slate  @MrAudioSoundImages
Uploaded February 2016 | Updated November 2026, 3 hours ago
The slate or clapboard, also known as a clapperboard, clapper, slate board, sync slate, time slate, sticks, board, and sound marker is used in the production of films. It was first necessary when sound was introduced to films in the 1920s, since sound was recorded on a separate device.
The clapboard was the idea of pioneer Hollywood soundman Leon M. Leon and also Australian Movie studio owner Frank Thring who was the first to use two hinged sticks. Leon had the sticks separate from the slate, but found it more convenient if they were attached. Leon was also the person who added the diagonal stripes on the sticks so that the position of the sticks could be seen more clearly, even in bad lighting.
The slate contains the visual information, which usually includes the film title, the director, the scene number, the camera angle, and the take number.
Typically, for every shot, the director will first call for sound to roll first, since tape or SD cards are cheaper than film. After the audio is at "speed", the director will call to roll film, then the slate. At that moment a person will hold the slate displaying the scene information in front of the camera, (at the proper focal distance), and in a loud voice they'll say the information so that it's recorded on the sound recorder. Then hit the two sticks together on the slate. The sound of sticks hitting and the picture of the two sticks coming together provide a common sync point for the sound and picture to be synchronized.
Today, slates are typically electronic with an LED display of the audio timecode, so that editors can simply locate the audio to the timecode displayed on the slate and no longer need to listen to the audio slate.
The SlateAmp ModelingNoise BarrierMic PreampRIAA EQPhasing PortsdBFSThe PedalboardLEDE RoomJack FMISDN CodecsBlues Harmonica
MrAudioSoundImages |

The Slate

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER