RIAA EQ @MrAudioSoundImages
RIAA EQ  @MrAudioSoundImages
Uploaded April 2015 | Updated November 2026, 3 hours ago
In the 1940s there were as many as 100 different turntable EQs for records. So in 1954 the RIAA, the Recording Industry Association of America established an EQ for records so that all disc recordings would be standardized.

This EQ added hi-frequency pre-emphasis to minimize the surface noise, in the same way that the NAB EQ helps minimize tape hiss. However, since music today is mixed with much more hi-frequency content than in 1954, care needs to be taken to assure that sibilance distortion doesn't occur, due to this hi-frequency premphasis.

In addition, the RIAA EQ adds a 6 dB per octave hi-pass roll off starting at 1 kHz, so that the signal at 20 Hz is reduced by 20 dB. This permits narrower grooves, allowing more time to be recorded on the disc. Without this low-end roll off, only about 5 minutes of music could be recorded on a 12" disc.

Then on playback of the disc, the highs are attenuated to match the pre-emphasis and the bass is boosted to match the de-emphasis.
RIAA EQPhasing PortsdBFSThe PedalboardLEDE RoomJack FMISDN CodecsBlues HarmonicaStereo RecordingZero Crossing and DC OffsetPitch InflationGuitar Techs
MrAudioSoundImages |

RIAA EQ

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER