The Concrete Pump Truck SAVES the OLD Shop Walls  ~ Part 2 ~ Rebuilding of The Salvage Cave @SalvageWorkshop
The Concrete Pump Truck SAVES the OLD Shop Walls  ~ Part 2 ~ Rebuilding of The Salvage Cave  @SalvageWorkshop
Uploaded September 2022 | Updated September 2026, 2 days ago
Link to PART ONE of The Salvage Cave Rebuild: youtu.be/xWf6DLgoHMY

The rebuild of the Salvage Cave continues! If you haven't already, be sure to go back and watch the first video in this series. Like most of the projects that I work on, this one ended up snowballing into a little more than just replacing the roof. In the second video, we will continue working on the Cave, which will include slushing the walls of the building with concrete to make it stronger, tearing off the front of the building, and more!

This building used to be a car repair shop. The extra space and room has been nice, but before I could use this shop as another workshop for the channel, a LOT of work needed to be done, including a new roof, better lighting, and much more! I have restored a variety of old tools and machines on the channel; now, it's time to restore an old shop. I spent the winter on this construction project, and I hope you'll enjoy following along. Join me on another adventure as I take an old, beat up shop and transform it into The Salvage Cave.

~

0:00 - Previously on Salvage Workshop...
1:00 - Part 2 of The Cave Rebuild
3:05 - Saving the Building
4:15 - Preparing the concrete blocks for the roof
5:25 - Adding plywood
5:50 - Removing the broken heater from inside the shop
6:50 - The back wall
10:35- Slushing concrete
15:00 - Finishing touches on the blocks
16:00 - Raising the concrete step in the back to prevent flooding
28:51 - Disposing of the old roof!
29:30 - The front of the building
31:00 - Tearing off the front of the building
33:00 - The new headers
42:00 - New insulation for the front of the building
43:24 - More roof disposal!
44:10 - Cutting plywood
45:20 - Testing Christmas tree
46:40 - Moving a truck with the loader
48:00 - Plans for the upcoming videos
50:00 - Doggies!!

~

If you have any suggestions, questions, or comments, please leave them below! Thanks for stopping by, I truly appreciate your support! Follow my Instagram for what else I'm up to!

★Instagram★ instagram.com/salvageworkshop

#TheSalvageCave #WorkshopRestoration #SalvageWorkshopOnSite
The Concrete Pump Truck SAVES the OLD Shop Walls  ~ Part 2 ~ Rebuilding of The Salvage CaveBringing HOME the OLD Allis Wheel Loader ~ Day 6 ~ AC Wheel LoaderThe old MFr DOESNT wanna DIG.... Lets FIX the Hydraulics!!! ~ Broke Down Backhoe ~ Part 2WHAT is 3 Phase Power? ~ Installing a Rotary Phase Converter ~ Part 2FORGOTTEN Hot Pressure Washer goes from Junk to JEWEL! ~ CHOPPED up to Fully RESTORED! ~ Part 2ALL-Terrain Forklift needs HELP... Big Tire Repair with a Little Rescue on the SIDE!Saving an Old Road Grader from an EARLY Grave ~ Caterpillar Motor Grader Sat Abandoned for 10+ YearsFixing a SWAMP behind the New Shop ~ Part 7 ~ Rebuilding of The Salvage CaveWorkshop Tour BEFORE the BIG CHANGES!FINALLY Found the PROBLEM! ~ Part 14 ~ Old Red 1950s Caterpillar TraxCavatorTime to Start FINISHING the INSIDE of the New Shop! ~ Part 10 ~ Rebuilding of The Salvage CaveItd be NICE if It Would STOP... Fixing Fork Truck Brakes! ~ RESCUING a 1960s Fork Truck ~ Part 3
Salvage Workshop |

The Concrete Pump Truck SAVES the OLD Shop Walls ~ Part 2 ~ Rebuilding of "The Salvage Cave"

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER