Time to Start FINISHING the INSIDE of the New Shop! ~ Part 10 ~ Rebuilding of The Salvage Cave @SalvageWorkshop
Time to Start FINISHING the INSIDE of the New Shop! ~ Part 10 ~ Rebuilding of The Salvage Cave  @SalvageWorkshop
Uploaded April 2023 | Updated September 2026, 2 days ago
HAVE you SEEN this whole series?

Link to the PLAYLIST so you can watch ALL of the videos on The Salvage Cave Rebuild:
youtube.com/playlist?list=PLYawuZlnembvRQCUv513QT3d2EyZpDXb6

~

When I first moved into this shop, there was A LOT of cleaning and organizing that had to be done. Today, I'll show you the inside of the building and we'll talk about how we're going to use this new space here at Salvage Workshop.

We will also repair some concrete flooring where one of the car lifts almost pulled out of the concrete and came crashing down!

I've also been wanting to remodel and improve the entry way room, so that is going to happen as well!

I hope you enjoy the video, and I look forward to hearing from you in the comments!

As ALWAYS, Thanks for Watching!

~

0:00 - Welcome to "The Salvage Cave"
7:58 - Repairing the Broken Concrete Floor
21:48 - Repairing & Finishing the Entryway Room at the Cave
39:26 - Discovering WALL Problems
43:20 - Building a New Wall to support the ceiling
46:56 - Working on the Rustic Wall Coverings
49:29 - Peeling that is Satisfying!!!
53:05 - Burnishing Pallet Boards to use as Base Boards along the walls
59:50 - Next up on the Salvage Cave

~

If you have any suggestions, questions, or comments, please leave them below!

Thanks for stopping by, I truly appreciate your support!

Follow my Instagram for what else I'm up to!

★Instagram★ instagram.com/salvageworkshop

#ShopRescue #TheSalvageCave #SalvageWorkshopOnSite
Time to Start FINISHING the INSIDE of the New Shop! ~ Part 10 ~ Rebuilding of The Salvage CaveItd be NICE if It Would STOP... Fixing Fork Truck Brakes! ~ RESCUING a 1960s Fork Truck ~ Part 3BASIC Track Loader Maintenance... NOT so EASY on Old Red ~ Part 12 ~ 1950s Caterpillar TraxCavator1930s Refractory Hammer ~ RESTORATION with an ANTIQUE PATINAOLD 2 Stage Air Compressor ~ WILL it EXPLODE!?! ~ Hydro Testing the Tank ~ RESTORATION Part 2Rescuing a 1960s Franken-Ford Tractor - It sat UNUSED for 10+ YEARS... Lets Change That!!I GAMBLED $600 on this Backhoe, sight UNSEEN?? Was the MF WORTH it?!? ~ Broke Down Backhoe ~ Part 1Repairing the Old SHYSTERs Hydraulic Cylinders ~ RESCUING a 60s Abused Fork Truck ~ Part 4Can we SAVE this BROKEN Lathe? ~ MAJOR Issues found! ~ Will it Ever CUT again?Transmission Removal from an OLD Bull Dozer ~ EASIER than I Thought! ~ Caterpillar D3 LGP - Part 5Fabri-Cobbling Tools for the ANVIL ~ Blacksmithing Tools from Random Stuff Around the ShopGoing DEEP into the Diesel Fuel SYSTEM... Can the Pros HELP? ~ 1995 Gehl 5625sx Skid Loader P4
Salvage Workshop |

Time to Start FINISHING the INSIDE of the New Shop! ~ Part 10 ~ Rebuilding of "The Salvage Cave"

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER