Fixing a SWAMP behind the New Shop ~ Part 7 ~ Rebuilding of The Salvage Cave @SalvageWorkshop
Fixing a SWAMP behind the New Shop ~ Part 7 ~ Rebuilding of The Salvage Cave  @SalvageWorkshop
Uploaded December 2022 | Updated September 2026, 1 day ago
HAVE you SEEN this whole series?

Link to the PLAYLIST so you can watch ALL of the videos on The Salvage Cave Rebuild:
youtube.com/playlist?list=PLYawuZlnembvRQCUv513QT3d2EyZpDXb6

There is NEVER a dull moment at The Salvage Cave! After removing the trees from the back, it was time to tackle the swamp. The back was a complete mud pit from an underground drain. I took the wheel loader outside to work on fixing the ground. You'll have to watch to see what happens! The goal in this project was to turn the back area of the shop into a usable space for the bigger machines that won't fit into the building. Join me as I work on creating more space for all of my projects on Salvage Workshop.

I hope you enjoy the video, and I look forward to hearing from you in the comments!

As ALWAYS, Thanks for Watching!

~

This building used to be a car repair shop. The extra space and room has been nice, but before I could use this shop as another workshop for the channel, a LOT of work needed to be done, including a new roof, better lighting, and much more! I have restored a variety of old tools and machines on the channel; now, it's time to restore an old shop. I spent the winter on this construction project, and I hope you'll enjoy following along. Join me on another adventure as I take an old, beat up shop and transform it into The Salvage Cave.

~

0:00 - Driving the wheel loader out back
0:30 - Going to the quarry
3:15 - What I'm working on today
6:05 - Starting up the wheel loader
9:45 - Getting the wheel loader stuck in the mud hole!
15:20 - Bringing out the GEHL
16:49 - Back in action!
20:38 - Working on the marsh!
27:30 - Moving rock
33:00 - Working on the GEHL
40:28 - Moving tree branches
47:04 - Dropping in the stone
1:04:00 - Moving a tree branch

~

If you have any suggestions, questions, or comments, please leave them below!

Thanks for stopping by, I truly appreciate your support!

Follow my Instagram for what else I'm up to!

★Instagram★ instagram.com/salvageworkshop

#ShopRestoration #TheSalvageCave #SalvageWorkshopOnSite
Fixing a SWAMP behind the New Shop ~ Part 7 ~ Rebuilding of The Salvage CaveWorkshop Tour BEFORE the BIG CHANGES!FINALLY Found the PROBLEM! ~ Part 14 ~ Old Red 1950s Caterpillar TraxCavatorTime to Start FINISHING the INSIDE of the New Shop! ~ Part 10 ~ Rebuilding of The Salvage CaveItd be NICE if It Would STOP... Fixing Fork Truck Brakes! ~ RESCUING a 1960s Fork Truck ~ Part 3BASIC Track Loader Maintenance... NOT so EASY on Old Red ~ Part 12 ~ 1950s Caterpillar TraxCavator1930s Refractory Hammer ~ RESTORATION with an ANTIQUE PATINAOLD 2 Stage Air Compressor ~ WILL it EXPLODE!?! ~ Hydro Testing the Tank ~ RESTORATION Part 2Rescuing a 1960s Franken-Ford Tractor - It sat UNUSED for 10+ YEARS... Lets Change That!!I GAMBLED $600 on this Backhoe, sight UNSEEN?? Was the MF WORTH it?!? ~ Broke Down Backhoe ~ Part 1Repairing the Old SHYSTERs Hydraulic Cylinders ~ RESCUING a 60s Abused Fork Truck ~ Part 4Can we SAVE this BROKEN Lathe? ~ MAJOR Issues found! ~ Will it Ever CUT again?
Salvage Workshop |

Fixing a SWAMP behind the New Shop ~ Part 7 ~ Rebuilding of "The Salvage Cave"

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER