Uploaded March 2025 | Updated September 2026, 2 days ago
Since the initial Security Update announcement form Bambu Lab, I have waited to talk about it until I was able to test it out for myself and spoiler... It 100% needs work. I hope the community around Bambu printers keeps pressure on Bambu to refine this update or at least continues to allow us to use older firmwares so users can still enjoy the powerhouse Orca Slicer is.
✅On the side of SteinWipe Motion Control code featured in this video, the project continues to evolve based on feedback and support from the community.
Update Feb.2026 :
The project is now solid for P1S P1P X1C with AMS! This project is still active and you can find it here:
patreon.com/collection/1998704 (Original)
patreon.com/collection/1996041 (Pro)
There are tons of new features and Ive discovered many better ways to tackle everything from installing the wiper to SteinSwitches, if you want to go down the new and improved SteinWipe project rabbit hole, these videos and links below are the perfect place to start (in order)!
1) Stay up to date on everything thats been done for SteinWipe:
patreon.com/collection/1994746
2) (this video) No more pasting Gcodes! Everything needed for the slicer is now in a single 3MF file!
youtu.be/jahBdUJ94KI
3) No more editing Gcodes to changes the SteinSwitches, these are now controlled with SteinSwitch Definitions (SSD's). This doc shows you how to use SSD's and what each ones does:
docs.google.com/document/d/1540a3b_T8ESQ08lXcBy6db43X7J7yxPiT3bDuzWYge4/edit?tab=t.0#heading=h.ra1esgt7py0c
4) New pause routine trailer featuring SSD's. I show how to use SSD's at 30 seconds mark:
youtube.com/shorts/cHqVBoUvAgc
5) Get started with the SteinWipe project and basic manual wiper code on MakerWorld for FREE!
makerworld.com/en/models/1025501-steinwipe-nozzle-wiper-for-x1-and-p1-series?from=search#profileId-1050795
6) New wiper install method and new template deep dive:
youtu.be/DPtA6Nmu70I
8) Tune your wiper offsets to prevent a mid-wipe crisis
discord.com/channels/1327182397673832448/1353220347511574608
💾 Orca Slicer 2.3.0
github.com/SoftFever/OrcaSlicer/releases/tag/v2.3.0-rc
💾 Bambu Studio
github.com/bambulab/BambuStudio/releases/tag/v01.10.02.76
💾 X1Plus
github.com/X1Plus/X1Plus/releases/tag/x1plus%2F2.0
🔻
Support this music creator!
"Ryan Little - Lucy's Song" is under a Creative Commons (BY-NC-SA 3.0) license:
creativecommons.org/licenses/iamryanlittle
Music powered by BreakingCopyright: • [No Copyright Music] Ryan Little
soundcloud.com/iamryanlittle/maybe-next-time
soundcloud.com/iamryanlittle/lucys-song
🔺
Since the initial Security Update announcement form Bambu Lab, I have waited to talk about it until I was able to test it out for myself and spoiler... It 100% needs work. I hope the community around Bambu printers keeps pressure on Bambu to refine this update or at least continues to allow us to use older firmwares so users can still enjoy the powerhouse Orca Slicer is.
✅On the side of SteinWipe Motion Control code featured in this video, the project continues to evolve based on feedback and support from the community.
Update Feb.2026 :
The project is now solid for P1S P1P X1C with AMS! This project is still active and you can find it here:
patreon.com/collection/1998704 (Original)
patreon.com/collection/1996041 (Pro)
There are tons of new features and Ive discovered many better ways to tackle everything from installing the wiper to SteinSwitches, if you want to go down the new and improved SteinWipe project rabbit hole, these videos and links below are the perfect place to start (in order)!
1) Stay up to date on everything thats been done for SteinWipe:
patreon.com/collection/1994746
2) (this video) No more pasting Gcodes! Everything needed for the slicer is now in a single 3MF file!
youtu.be/jahBdUJ94KI
3) No more editing Gcodes to changes the SteinSwitches, these are now controlled with SteinSwitch Definitions (SSD's). This doc shows you how to use SSD's and what each ones does:
docs.google.com/document/d/1540a3b_T8ESQ08lXcBy6db43X7J7yxPiT3bDuzWYge4/edit?tab=t.0#heading=h.ra1esgt7py0c
4) New pause routine trailer featuring SSD's. I show how to use SSD's at 30 seconds mark:
youtube.com/shorts/cHqVBoUvAgc
5) Get started with the SteinWipe project and basic manual wiper code on MakerWorld for FREE!
makerworld.com/en/models/1025501-steinwipe-nozzle-wiper-for-x1-and-p1-series?from=search#profileId-1050795
6) New wiper install method and new template deep dive:
youtu.be/DPtA6Nmu70I
8) Tune your wiper offsets to prevent a mid-wipe crisis
discord.com/channels/1327182397673832448/1353220347511574608
💾 Orca Slicer 2.3.0
github.com/SoftFever/OrcaSlicer/releases/tag/v2.3.0-rc
💾 Bambu Studio
github.com/bambulab/BambuStudio/releases/tag/v01.10.02.76
💾 X1Plus
github.com/X1Plus/X1Plus/releases/tag/x1plus%2F2.0
🔻
Support this music creator!
"Ryan Little - Lucy's Song" is under a Creative Commons (BY-NC-SA 3.0) license:
creativecommons.org/licenses/iamryanlittle
Music powered by BreakingCopyright: • [No Copyright Music] Ryan Little
soundcloud.com/iamryanlittle/maybe-next-time
soundcloud.com/iamryanlittle/lucys-song
🔺
