Uploaded May 2026 | Updated September 2026, 4 days ago
This updated template model now allows you to locate and drill the holes for mounting the SteinWipe wiper mod with the template in place. First place the template on the printer then with a 1/16" drill bit you drill the 3 holes needed for mounting the wiper. After the 3 pilot holes are drilled, you open up the holes to the final size with a 1/8th drill bit. This ensures the most accurate hole placement and that the holes are the correct size by preventing fly cutting. File is up already on the Steinwipe Discord channel and will soon come to the leckiestein site, patreon, and the Makerworld original project listing.
This updated template model now allows you to locate and drill the holes for mounting the SteinWipe wiper mod with the template in place. First place the template on the printer then with a 1/16" drill bit you drill the 3 holes needed for mounting the wiper. After the 3 pilot holes are drilled, you open up the holes to the final size with a 1/8th drill bit. This ensures the most accurate hole placement and that the holes are the correct size by preventing fly cutting. File is up already on the Steinwipe Discord channel and will soon come to the leckiestein site, patreon, and the Makerworld original project listing.
