Uploaded September 2022 | Updated September 2026, 2 weeks ago

---

This kit was kindly sent to my channel, It was sent by the RC Elf!!!!
This kit is box stock other than a bearing kit & a 2S lipo pack.
I had a new but dead TBLE-02 esc, so I cut off both on/off switches and put the Tamiya switch on the HW1060 esc, now I can (and did) mount it in the stock location.
I did replace all the MA23 shock shaft guides with standard red o-rings in the shocks, So far, No leaks!! (I used green slime to lube the o-rings first)
I really wanted to get this up to the track but my side-kick is a bit under the weather & I didn't feel like going alone. feel better soon Kev!!!!

Thank You Again, RC Elf!!!!
And........
Thank You All for watching!!!