Spend a Day Glazing with Me @floriangadsby
Spend a Day Glazing with Me  @floriangadsby
Uploaded September 2026 | Updated November 2026, 21 hours ago
Come with me for a day of glazing.
 
There’s a system here, an order to things. I’m never just glazing what’s closest to hand, nor do I use glazes at random to coat my pieces. Instead, I have a very specific way of doing things that goes something like this:
 
Not included in this video is how I begin with my white variant of the crackle glaze I use. This way, as things progress, as I move onto using the pale green and then the dark green feldspathic crackle glaze, I don’t have to wash or clean my tools as there’s no way the weaker variant, (in terms of iron content, the colourant), can contaminate the versions that contain more iron. It may dilute them a tiny bit but it’s negligible.
 
Because of this, I coat everything with white, then pale green, then dark green. Then I go back to the beginning and coat the interior forms of all of those pots I glaze in two parts.
 
Secondly, I normally start with the larger pots when the buckets of glaze are full. Sometimes, this means descanting some, otherwise it can overflow due to displacement, or I’ll glaze smaller vessels first until the glaze comes to about 10 cm below the rim, that’s normally enough for my larger pots. Currently, these larger buckets sort of dictate the maximum size I’m making at the moment.
 
In order to try and save as much glaze as possible, before I begin a glazing session, I thoroughly clean the tabletop, this way, as I wipe away excess glaze from the bottoms of the waxed pots onto it, I can scrape that up and add it back to one of the basins of waste that I keep for each specific glaze. Eventually, this is then sieved back into the larger buckets the pots were dipped into.
 
Other than that, I sponge down the surfaces often, I mop numerous times throughout the day and I often dry pots in front of the fan as if they stay clad in sticky glaze for too long it can begin to bubble and flake off.
 
Phew.
 
#glaze #pottery #satisfying #clay #handmade
Spend a Day Glazing with MeThe Hardest Pieces of Pottery to MakeHelping a /r/pottery user!My Best Tips for Handling PullingThe Smallest Pottery Ive Ever ThrownNowhere to Hide — The Difficulties Behind Minimal PotteryVisiting Hyakkō, an Exhibition @JapanHouseLondonMy Friday Studio ResetThe Chaotic Reality of Shipping Handmade Pottery
Florian Gadsby |

Spend a Day Glazing with Me

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER