Uploaded May 2021 | Updated September 2026, 2 weeks ago

---

This will be my last (hopefully) attemp at a speed benchy. Wanted to at least get in the sub 5!! Now time so focus on quality prints.

-Accel: 120K
-Decel: 90K
-Cornerspeed: 120
-Printspeed: 200-350mm/s depending on sections

-Printer: VzBoT (Custom designed/built) 330x330x400mm grabcad.com/library/vzbot-1
-Klipper
-Odrive V3 system
-270 KV motors
-Pressure Advance 0.003
-Input_shaper tuned with Accelerometer
-MGN12 rails Y MGN9 rail X
-Magnum+
-PT100
-Hextrudort from HevORT direct drive. miragec79.github.io/HextrudORT
-Custom EVA X carriage modded for Nova https://main.eva-3d.page/
-0.3mm retract
-260C ABS
-PEI coted flex plate
-10mm Z smooth rods
-1 single Z motor, 2:1 gear ratio
-0.4mm nozzle
-0.25mm layer height