Uploaded August 2021 | Updated September 2026, 2 weeks ago
I know I said it was my last attempt the other day, but while I was having fun with the #VzSpeedCube I thought I would give a last chance to the benchy to run under 4min since I added my RSCS! And it did it.... well, if you still can call it a benchy haha.
I was able to do a sub 4 this time because for the first time, I used the "combined" infill rule. We are allow to do it, but clearly, it was not 100% able to stick and lay it down, but it still worked to have enough surface to lay down the bottom solid fill.
-120K accel / decel
-300 to 450mms
-crazy fast corner speed
-RSCS cooling
-2 walls, 3 bottom, 3 top, 10% infill (combined every 2 layers)
-0.5mm layer width
-0.25 layer height
-260C Esun ABS+
I know I said it was my last attempt the other day, but while I was having fun with the #VzSpeedCube I thought I would give a last chance to the benchy to run under 4min since I added my RSCS! And it did it.... well, if you still can call it a benchy haha.
I was able to do a sub 4 this time because for the first time, I used the "combined" infill rule. We are allow to do it, but clearly, it was not 100% able to stick and lay it down, but it still worked to have enough surface to lay down the bottom solid fill.
-120K accel / decel
-300 to 450mms
-crazy fast corner speed
-RSCS cooling
-2 walls, 3 bottom, 3 top, 10% infill (combined every 2 layers)
-0.5mm layer width
-0.25 layer height
-260C Esun ABS+
