Uploaded October 2018 | Updated November 2026, 1 day ago
Playing a few recordings from the reel that came with my USSR (Soviet-Lithuanian) reel-to-reel tape recorder, the P-180-M (П-180-M), manufactured by VILMA, a company that not only made tape and wire recorders (and as far as I can tell from their website, still MAKES WIRE RECORDERS TO THIS DAY!!!!!), but also made secret devices for used by the KGB, and the Soviet Air Force and Navy!
VILMA Factory Website:
translate.google.com/translate?hl=en&sl=ru&tl=en&u=http%3A%2F%2Fwww.petrovsky.nnov.ru
Crypto museum article on VILMA:
cryptomuseum.com/manuf/vilma/index.htm
These may be KGB or other spy or military recordings, or perhaps just someone at his home wanted to record his telephone calls. I don't know, as I don't speak Russian.
Did someone mention the nuclear program? Kinda sounded like it at one point, but I'm not sure.
This recorder runs at a single speed, 1 7/8 IPS (4.8 cm/sec). AC bias, AC erase. Manual level control. 3-heads, but ONLY can monitor the playback head during recording, so the operator is absolutely certain that recordings are taking place. Setting the level is by means of a neon indicator (why not use a nice meter movement‽). I think that overdrive is shown when the neon lights up, so level is set with the play volume knob set to the red marking, then recording level set where loudest sound lights the neon, of course after a short time delay, as the tape travels from record head to play head. This is what I believe is the proper way to set the level. Correct me if wrong.
I have finally built a little amplifier module for this recorder, and installed a battery holder for a set of three 18650 Li-Ion cells to power this unit at about 12VDC. The unit originally used some proprietary or hard-to-find batteries, so 18650's work nicely instead. I can then charge them with a separate Li-Ion charger I built. The 12V goes from the external power input jack (this time used as a power output jack) to power a separate 1.5W transistor amplifier, which has its volume preset, so the recorder's (only designed for headphones or external amp I believe) volume control would control amplifier volume. The little amplifier works nicely. The amplifier's circuit schematic is here:
redcircuits.com/Page33.htm
Playing a few recordings from the reel that came with my USSR (Soviet-Lithuanian) reel-to-reel tape recorder, the P-180-M (П-180-M), manufactured by VILMA, a company that not only made tape and wire recorders (and as far as I can tell from their website, still MAKES WIRE RECORDERS TO THIS DAY!!!!!), but also made secret devices for used by the KGB, and the Soviet Air Force and Navy!
VILMA Factory Website:
translate.google.com/translate?hl=en&sl=ru&tl=en&u=http%3A%2F%2Fwww.petrovsky.nnov.ru
Crypto museum article on VILMA:
cryptomuseum.com/manuf/vilma/index.htm
These may be KGB or other spy or military recordings, or perhaps just someone at his home wanted to record his telephone calls. I don't know, as I don't speak Russian.
Did someone mention the nuclear program? Kinda sounded like it at one point, but I'm not sure.
This recorder runs at a single speed, 1 7/8 IPS (4.8 cm/sec). AC bias, AC erase. Manual level control. 3-heads, but ONLY can monitor the playback head during recording, so the operator is absolutely certain that recordings are taking place. Setting the level is by means of a neon indicator (why not use a nice meter movement‽). I think that overdrive is shown when the neon lights up, so level is set with the play volume knob set to the red marking, then recording level set where loudest sound lights the neon, of course after a short time delay, as the tape travels from record head to play head. This is what I believe is the proper way to set the level. Correct me if wrong.
I have finally built a little amplifier module for this recorder, and installed a battery holder for a set of three 18650 Li-Ion cells to power this unit at about 12VDC. The unit originally used some proprietary or hard-to-find batteries, so 18650's work nicely instead. I can then charge them with a separate Li-Ion charger I built. The 12V goes from the external power input jack (this time used as a power output jack) to power a separate 1.5W transistor amplifier, which has its volume preset, so the recorder's (only designed for headphones or external amp I believe) volume control would control amplifier volume. The little amplifier works nicely. The amplifier's circuit schematic is here:
redcircuits.com/Page33.htm










