SolidWorks LIVE: Modelling Practice with a CSWE @FullyDefined-Design
SolidWorks LIVE: Modelling Practice with a CSWE  @FullyDefined-Design
Uploaded October 2025 | Updated November 2026, 2 days ago
🎥 Welcome to the Fully Defined LIVE

Join me as I tackle @TooTallToby 's Speed Modelling Practice Models in SolidWorks
Whether you're a SolidWorks beginner or a design pro, you’ll pick up tips, shortcuts, and insights as I take you through my process in real time. Following the livestream, check the timestamps for model names and to find the practice or speed runs for each!

🧱 Today’s Focus: Practice Models Tier 4 and above for the final rounds of 2025 World Championships
📐 CAD Software: SolidWorks 2023

💬 Got questions as we go? Drop them in the chat—I’ll answer as many as I can during the stream!
Or join the Discord: discord.gg/MW4xY2md

🔔 Don’t forget to subscribe to catch future streams and edited tutorials.

📺 Missed part of the live session? The full recording will be available here after the stream ends. The series of lessons will be edited and launched at a later date.


🚨 NEW IN 2025 🚨
SolidWorks for Designers: Foundations to CSWA
7- Hour Guided Course - Learn from me!
Teaching all of the fundamentals required to achieve CSWA and set you up for future learning
udemy.com/course/solidworks-for-designers-foundations-to-cswa/?referralCode=72203B375E1FB455DFBA

📝 References

🔽 TOO TALL TOBY'S PRACTICE MODELS 🔽
Go to tootalltoby.com and signup for your FREE account today

🕰️ Timestamps
Will be added at the conclusion
00:00 Starting
03:00 Intro
07:20 24-12-11 - HUB - Tier 4 - Speed Run
15:20 25-10-12 - RIGO BENCH - Tier 4 - Tutorial using blocks
26:30 25-WC-31 - WHEEL AND TIRE - Tier 5 - Speed Run
42:10 25-02-02 - SOAP DISH BASE - Tier 5 - Speed Run
56:30 25-09-12 - AARON C - Tier 6 - Tutorial
1:25:45 25-03-03 - VALVE BODY - Tier 5 - Tutorial
1:39:30 25-04-05 - SM SAFETY COVER - Tier 5 - Speed Run
1:55:10 25-01-10 - SPOOL - Tier 4 - Speed Run
2:00:50 25-01-13 - ANCHOR PLATE - Tier 4 - Speed Run
2:05:40 Wrap up


#TooTallToby, #CAD, #tutorial, #practice, #SolidWorks, #2Dto3D
SolidWorks LIVE: Modelling Practice with a CSWESolidWorks LIVE: Modelling Practice with a CSWESolidWorks LIVE: Modelling Practice with a CSWESolidWorks Tutorials - Lesson 2: AssembliesCreate Features from a Master Sketch - SolidWorks Designer ProcessMatching a Part from your Toolmaker - SolidWorks Advanced skillsSolidWorks Livestream: Design Handle TreatmentsTTT Four Hole Flange - SolidWorks Speed Model TutorialVenus Fly Trap - 3D Printed Pot - SolidWorks workflowSolidWorks for Beginner Product Designers - Model a Pulley - Revolve, Loft, Rib & Pattern - Lesson 3SolidWorks LIVE: Modelling Practice with a CSWELesson 1 - Model a 2x2 Plate - SolidWorks Tutorial: LEGO Off-Road Buggy
Fully Defined |

SolidWorks LIVE: Modelling Practice with a CSWE

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER