SolidWorks LIVE: Modelling Practice with a CSWE @FullyDefined-Design
SolidWorks LIVE: Modelling Practice with a CSWE  @FullyDefined-Design
Uploaded September 2025 | Updated November 2026, 2 days ago
🎥 Welcome to the Fully Defined LIVE

Join me as I tackle @TooTallToby 's Speed Modelling Practice Models in SolidWorks
Whether you're a SolidWorks beginner or a design pro, you’ll pick up tips, shortcuts, and insights as I take you through my process in real time. Following the livestream, check the timestamps for model names and to find the practice or speed runs for each!

🧱 Today’s Focus: Practice Models Tier 3, 4 and models from the current World Champs
📐 CAD Software: SolidWorks 2023

💬 Got questions as we go? Drop them in the chat—I’ll answer as many as I can during the stream! Or join the Discord: discord.gg/MW4xY2md

🔔 Don’t forget to subscribe to catch future streams and edited tutorials.

📺 Missed part of the live session? The full recording will be available here after the stream ends. The series of lessons will be edited and launched at a later date.


🚨 NEW IN 2025 🚨
SolidWorks for Designers: Foundations to CSWA
7- Hour Guided Course - Learn from me!
Teaching all of the fundamentals required to achieve CSWA and set you up for future learning
udemy.com/course/solidworks-for-designers-foundations-to-cswa/?referralCode=72203B375E1FB455DFBA

📝 References

🔽 TOO TALL TOBY'S PRACTICE MODELS 🔽
Go to tootalltoby.com and signup for your FREE account today

🕰️ Timestamps
00:00 Starting
01:16 Intro
03:00 25-09-04 - MINWATEX - Tier 5 - Practice
18:50 25-09-04 - MINWATEX - Tier 5 - Speed Run
25:00 24-11-06 - 2 INCH WELD NECK FLANGE - Tier 3 - Practice
35:25 24-11-06 - 2 INCH WELD NECK FLANGE - Tier 3 - Speed Run
41:30 Jakob v MrAlex WC25 round1 Reactions
47:40 25-WC-07 - FLANGE COUPLING - Tier 3 - Practice
51:30 Jakob v MrAlex WC25 round2 Reactions
57:20 25-WC-06 - 90 DEG ROD MOUNT - Tier 3 - Practice
01:01:50 24-12-01 - 3D PRINTED JIG - Tier 4 - Practice
01:16:00 24-12-01 - 3D PRINTED JIG - Tier 4 - Speed Run
01:22:00 New LEGO Build & Learn Series - Coming Soon
01:24:00 25-01-17 - TAPERED HOLE JIG - Tier 5 - Practice
01:57:48 25-01-17 - TAPERED HOLE JIG - Tier 5 - Speed Run
02:01:10 Lotos v Dom WC25 round1 Reactions
02:04:10 25-WC-05 - SM TAB BRACKET - Tier 3 - Practice
02:08:41 Lotos v Dom WC25 round2 Reactions
02:12:30 25-WC-03 - LOWER TUBE MOUNT - Tier 3 - Practice
02:20:40 25-08-06 - CIRC GRILL TOP - Tier 6 - Practice
02:36:10 25-08-06 - CIRC GRILL TOP - Tier 6 - Speed Run
02:40:00 25-05-11 - SLOTTED FRAME - Tier 4 - Practice
02:53:20 25-05-11 - SLOTTED FRAME - Tier 4 - Speed Run

#TooTallToby, #CAD, #tutorial, #practice, #SolidWorks, #2Dto3D
SolidWorks LIVE: Modelling Practice with a CSWESolidWorks Tutorials - Lesson 2: AssembliesCreate Features from a Master Sketch - SolidWorks Designer ProcessMatching a Part from your Toolmaker - SolidWorks Advanced skillsSolidWorks Livestream: Design Handle TreatmentsTTT Four Hole Flange - SolidWorks Speed Model TutorialVenus Fly Trap - 3D Printed Pot - SolidWorks workflowSolidWorks for Beginner Product Designers - Model a Pulley - Revolve, Loft, Rib & Pattern - Lesson 3SolidWorks LIVE: Modelling Practice with a CSWELesson 1 - Model a 2x2 Plate - SolidWorks Tutorial: LEGO Off-Road BuggySolidWorks Tutorials - ConfigurationsTTT March 2024 Speed Modelling Challenge
Fully Defined |

SolidWorks LIVE: Modelling Practice with a CSWE

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER